diff -ruN httpd-2.0.48.orig/build/ltmain.sh httpd-2.0.48/build/ltmain.sh --- httpd-2.0.48.orig/build/ltmain.sh Fri Oct 24 11:51:18 2003 +++ httpd-2.0.48/build/ltmain.sh Fri Oct 31 10:33:25 2003 @@ -1758,7 +1758,7 @@ if test "$installed" = no; then notinst_deplibs="$notinst_deplibs $lib" - need_relink=yes + need_relink=no fi if test -n "$old_archive_from_expsyms_cmds"; then diff -ruN httpd-2.0.48.orig/default-fink.conf httpd-2.0.48/default-fink.conf --- httpd-2.0.48.orig/default-fink.conf Wed Dec 31 17:00:00 1969 +++ httpd-2.0.48/default-fink.conf Fri Oct 31 10:40:51 2003 @@ -0,0 +1,72 @@ +--with-apr=@FINKPREFIX@/bin/apr-config +--with-apr-util=@FINKPREFIX@ +--enable-v4-mapped +--enable-modules=all +--enable-mods-shared=all +--enable-auth-anon +--enable-auth-dbm +--enable-auth-digest +--enable-isapi +--enable-file-cache +--enable-echo +--enable-charset-lite +--enable-cache +--enable-disk-cache +--enable-mem-cache +--enable-example +--enable-case-filter +--enable-case-filter-in +--enable-ext-filter +--enable-deflate +--enable-logio +--enable-mime-magic +--enable-cern-meta +--enable-expires +--enable-headers +--enable-usertrack +--enable-unique-id +--enable-proxy +--enable-proxy-connect +--enable-proxy-ftp +--enable-proxy-http +--enable-optional-hook-export +--enable-optional-hook-import +--enable-optional-fn-import +--enable-optional-fn-export +--enable-bucketeer +--enable-http +--enable-dav +--enable-info +--enable-suexec +--enable-cgi +--enable-cgid +--enable-dav_fs +--enable-vhost-alias +--enable-speling +--enable-rewrite +--enable-so +--with-dbm=db4 +--with-expat=@FINKPREFIX@ +--with-iconv=@FINKPREFIX@ +--with-gdbm=@FINKPREFIX@ +--with-berkeley-db=@FINKPREFIX@ +--enable-threads +--enable-other-child +--with-suexec-caller=www +--with-suexec-userdir=Sites +--with-pic +--enable-shared +--prefix=@FINKPREFIX@/var/apache2 +--exec-prefix=@FINKPREFIX@/var/apache2 +--bindir=@FINKPREFIX@/bin +--sbindir=@FINKPREFIX@/sbin +--libexecdir=@FINKPREFIX@/lib/apache2/modules +--datadir=@FINKPREFIX@/var/apache2 +--sysconfdir=@FINKPREFIX@/etc/apache2 +--sharedstatedir=@FINKPREFIX@/share/apache2 +--localstatedir=@FINKPREFIX@/var/apache2 +--libdir=@FINKPREFIX@/lib/apache2 +--includedir=@FINKPREFIX@/include/apache2 +--oldincludedir=@FINKPREFIX@/include/apache2 +--mandir=@FINKPREFIX@/share/man +--infodir=@FINKPREFIX@/share/info diff -ruN httpd-2.0.48.orig/httpd-std.conf.fink httpd-2.0.48/httpd-std.conf.fink --- httpd-2.0.48.orig/httpd-std.conf.fink Wed Dec 31 17:00:00 1969 +++ httpd-2.0.48/httpd-std.conf.fink Fri Oct 31 10:33:25 2003 @@ -0,0 +1,1109 @@ +# +# Based upon the NCSA server configuration files originally by Rob McCool. +# +# This is the main Apache server configuration file. It contains the +# configuration directives that give the server its instructions. +# See for detailed information about +# the directives. +# +# Do NOT simply read the instructions in here without understanding +# what they do. They're here only as hints or reminders. If you are unsure +# consult the online docs. You have been warned. +# +# The configuration directives are grouped into three basic sections: +# 1. Directives that control the operation of the Apache server process as a +# whole (the 'global environment'). +# 2. Directives that define the parameters of the 'main' or 'default' server, +# which responds to requests that aren't handled by a virtual host. +# These directives also provide default values for the settings +# of all virtual hosts. +# 3. Settings for virtual hosts, which allow Web requests to be sent to +# different IP addresses or hostnames and have them handled by the +# same Apache server process. +# +# Configuration and logfile names: If the filenames you specify for many +# of the server's control files begin with "/" (or "drive:/" for Win32), the +# server will use that explicit path. If the filenames do *not* begin +# with "/", the value of ServerRoot is prepended -- so "logs/foo.log" +# with ServerRoot set to "@FINKPREFIX@/var/apache2" will be interpreted by the +# server as "@FINKPREFIX@/var/apache2/logs/foo.log". +# + +### Section 1: Global Environment +# +# The directives in this section affect the overall operation of Apache, +# such as the number of concurrent requests it can handle or where it +# can find its configuration files. +# + +# +# ServerRoot: The top of the directory tree under which the server's +# configuration, error, and log files are kept. +# +# NOTE! If you intend to place this on an NFS (or otherwise network) +# mounted filesystem then please read the LockFile documentation (available +# at ); +# you will save yourself a lot of trouble. +# +# Do NOT add a slash at the end of the directory path. +# +ServerRoot "@FINKPREFIX@/var/apache2" + +# +# The accept serialization lock file MUST BE STORED ON A LOCAL DISK. +# + + +#LockFile logs/accept.lock + + + +# +# ScoreBoardFile: File used to store internal server process information. +# If unspecified (the default), the scoreboard will be stored in an +# anonymous shared memory segment, and will be unavailable to third-party +# applications. +# If specified, ensure that no two invocations of Apache share the same +# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK. +# + + +#ScoreBoardFile logs/apache_runtime_status + + + + +# +# PidFile: The file in which the server should record its process +# identification number when it starts. +# + +PidFile logs/httpd.pid + + +# +# Timeout: The number of seconds before receives and sends time out. +# +Timeout 300 + +# +# KeepAlive: Whether or not to allow persistent connections (more than +# one request per connection). Set to "Off" to deactivate. +# +KeepAlive On + +# +# MaxKeepAliveRequests: The maximum number of requests to allow +# during a persistent connection. Set to 0 to allow an unlimited amount. +# We recommend you leave this number high, for maximum performance. +# +MaxKeepAliveRequests 100 + +# +# KeepAliveTimeout: Number of seconds to wait for the next request from the +# same client on the same connection. +# +KeepAliveTimeout 15 + +## +## Server-Pool Size Regulation (MPM specific) +## + +# prefork MPM +# StartServers: number of server processes to start +# MinSpareServers: minimum number of server processes which are kept spare +# MaxSpareServers: maximum number of server processes which are kept spare +# MaxClients: maximum number of server processes allowed to start +# MaxRequestsPerChild: maximum number of requests a server process serves + +StartServers 5 +MinSpareServers 5 +MaxSpareServers 10 +MaxClients 150 +MaxRequestsPerChild 0 + + +# worker MPM +# StartServers: initial number of server processes to start +# MaxClients: maximum number of simultaneous client connections +# MinSpareThreads: minimum number of worker threads which are kept spare +# MaxSpareThreads: maximum number of worker threads which are kept spare +# ThreadsPerChild: constant number of worker threads in each server process +# MaxRequestsPerChild: maximum number of requests a server process serves + +StartServers 2 +MaxClients 150 +MinSpareThreads 25 +MaxSpareThreads 75 +ThreadsPerChild 25 +MaxRequestsPerChild 0 + + +# perchild MPM +# NumServers: constant number of server processes +# StartThreads: initial number of worker threads in each server process +# MinSpareThreads: minimum number of worker threads which are kept spare +# MaxSpareThreads: maximum number of worker threads which are kept spare +# MaxThreadsPerChild: maximum number of worker threads in each server process +# MaxRequestsPerChild: maximum number of connections per server process + +NumServers 5 +StartThreads 5 +MinSpareThreads 5 +MaxSpareThreads 10 +MaxThreadsPerChild 20 +MaxRequestsPerChild 0 + + +# WinNT MPM +# ThreadsPerChild: constant number of worker threads in the server process +# MaxRequestsPerChild: maximum number of requests a server process serves + +ThreadsPerChild 250 +MaxRequestsPerChild 0 + + +# BeOS MPM +# StartThreads: how many threads do we initially spawn? +# MaxClients: max number of threads we can have (1 thread == 1 client) +# MaxRequestsPerThread: maximum number of requests each thread will process + +StartThreads 10 +MaxClients 50 +MaxRequestsPerThread 10000 + + +# NetWare MPM +# ThreadStackSize: Stack size allocated for each worker thread +# StartThreads: Number of worker threads launched at server startup +# MinSpareThreads: Minimum number of idle threads, to handle request spikes +# MaxSpareThreads: Maximum number of idle threads +# MaxThreads: Maximum number of worker threads alive at the same time +# MaxRequestsPerChild: Maximum number of requests a thread serves. It is +# recommended that the default value of 0 be set for this +# directive on NetWare. This will allow the thread to +# continue to service requests indefinitely. + +ThreadStackSize 65536 +StartThreads 250 +MinSpareThreads 25 +MaxSpareThreads 250 +MaxThreads 1000 +MaxRequestsPerChild 0 + + +# OS/2 MPM +# StartServers: Number of server processes to maintain +# MinSpareThreads: Minimum number of idle threads per process, +# to handle request spikes +# MaxSpareThreads: Maximum number of idle threads per process +# MaxRequestsPerChild: Maximum number of connections per server process + +StartServers 2 +MinSpareThreads 5 +MaxSpareThreads 10 +MaxRequestsPerChild 0 + + +# +# Listen: Allows you to bind Apache to specific IP addresses and/or +# ports, instead of the default. See also the +# directive. +# +# Change this to Listen on specific IP addresses as shown below to +# prevent Apache from glomming onto all bound IP addresses (0.0.0.0) +# +#Listen 12.34.56.78:80 + +Listen 80 + +# +# Dynamic Shared Object (DSO) Support +# +# To be able to use the functionality of a module which was built as a DSO you +# have to place corresponding `LoadModule' lines at this location so the +# directives contained in it are actually available _before_ they are used. +# Statically compiled modules (those listed by `httpd -l') do not need +# to be loaded here. +# +# Example: +# LoadModule foo_module modules/mod_foo.so +# +LoadModule access_module @FINKPREFIX@/lib/apache2/modules/mod_access.so +LoadModule auth_module @FINKPREFIX@/lib/apache2/modules/mod_auth.so +LoadModule file_cache_module @FINKPREFIX@/lib/apache2/modules/mod_file_cache.so +LoadModule echo_module @FINKPREFIX@/lib/apache2/modules/mod_echo.so +LoadModule charset_lite_module @FINKPREFIX@/lib/apache2/modules/mod_charset_lite.so +LoadModule cache_module @FINKPREFIX@/lib/apache2/modules/mod_cache.so +LoadModule disk_cache_module @FINKPREFIX@/lib/apache2/modules/mod_disk_cache.so +LoadModule mem_cache_module @FINKPREFIX@/lib/apache2/modules/mod_mem_cache.so +LoadModule example_module @FINKPREFIX@/lib/apache2/modules/mod_example.so +LoadModule case_filter_module @FINKPREFIX@/lib/apache2/modules/mod_case_filter.so +LoadModule case_filter_in_module @FINKPREFIX@/lib/apache2/modules/mod_case_filter_in.so +LoadModule ext_filter_module @FINKPREFIX@/lib/apache2/modules/mod_ext_filter.so +LoadModule include_module @FINKPREFIX@/lib/apache2/modules/mod_include.so +LoadModule deflate_module @FINKPREFIX@/lib/apache2/modules/mod_deflate.so +LoadModule log_config_module @FINKPREFIX@/lib/apache2/modules/mod_log_config.so +LoadModule logio_module @FINKPREFIX@/lib/apache2/modules/mod_logio.so +LoadModule env_module @FINKPREFIX@/lib/apache2/modules/mod_env.so +LoadModule cern_meta_module @FINKPREFIX@/lib/apache2/modules/mod_cern_meta.so +LoadModule setenvif_module @FINKPREFIX@/lib/apache2/modules/mod_setenvif.so +LoadModule optional_hook_export_module @FINKPREFIX@/lib/apache2/modules/mod_optional_hook_export.so +LoadModule optional_hook_import_module @FINKPREFIX@/lib/apache2/modules/mod_optional_hook_import.so +LoadModule optional_fn_import_module @FINKPREFIX@/lib/apache2/modules/mod_optional_fn_import.so +LoadModule optional_fn_export_module @FINKPREFIX@/lib/apache2/modules/mod_optional_fn_export.so +LoadModule mime_module @FINKPREFIX@/lib/apache2/modules/mod_mime.so +LoadModule dav_module @FINKPREFIX@/lib/apache2/modules/mod_dav.so +LoadModule status_module @FINKPREFIX@/lib/apache2/modules/mod_status.so +LoadModule autoindex_module @FINKPREFIX@/lib/apache2/modules/mod_autoindex.so +LoadModule asis_module @FINKPREFIX@/lib/apache2/modules/mod_asis.so +LoadModule cgi_module @FINKPREFIX@/lib/apache2/modules/mod_cgi.so +LoadModule dav_fs_module @FINKPREFIX@/lib/apache2/modules/mod_dav_fs.so +LoadModule negotiation_module @FINKPREFIX@/lib/apache2/modules/mod_negotiation.so +LoadModule dir_module @FINKPREFIX@/lib/apache2/modules/mod_dir.so +LoadModule imap_module @FINKPREFIX@/lib/apache2/modules/mod_imap.so +LoadModule userdir_module @FINKPREFIX@/lib/apache2/modules/mod_userdir.so +LoadModule alias_module @FINKPREFIX@/lib/apache2/modules/mod_alias.so + +# +# ExtendedStatus controls whether Apache will generate "full" status +# information (ExtendedStatus On) or just basic information (ExtendedStatus +# Off) when the "server-status" handler is called. The default is Off. +# +#ExtendedStatus On + +### Section 2: 'Main' server configuration +# +# The directives in this section set up the values used by the 'main' +# server, which responds to any requests that aren't handled by a +# definition. These values also provide defaults for +# any containers you may define later in the file. +# +# All of these directives may appear inside containers, +# in which case these default settings will be overridden for the +# virtual host being defined. +# + + + +# +# If you wish httpd to run as a different user or group, you must run +# httpd as root initially and it will switch. +# +# User/Group: The name (or #number) of the user/group to run httpd as. +# . On SCO (ODT 3) use "User nouser" and "Group nogroup". +# . On HPUX you may not be able to use shared memory as nobody, and the +# suggested workaround is to create a user www and use that user. +# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET) +# when the value of (unsigned)Group is above 60000; +# don't use Group #-1 on these systems! +# +User www +Group www + + + +# +# ServerAdmin: Your address, where problems with the server should be +# e-mailed. This address appears on some server-generated pages, such +# as error documents. e.g. admin@your-domain.com +# +ServerAdmin you@your.address + +# +# ServerName gives the name and port that the server uses to identify itself. +# This can often be determined automatically, but we recommend you specify +# it explicitly to prevent problems during startup. +# +# If this is not set to valid DNS name for your host, server-generated +# redirections will not work. See also the UseCanonicalName directive. +# +# If your host doesn't have a registered DNS name, enter its IP address here. +# You will have to access it by its address anyway, and this will make +# redirections work in a sensible way. +# +#ServerName new.host.name:80 + +# +# UseCanonicalName: Determines how Apache constructs self-referencing +# URLs and the SERVER_NAME and SERVER_PORT variables. +# When set "Off", Apache will use the Hostname and Port supplied +# by the client. When set "On", Apache will use the value of the +# ServerName directive. +# +UseCanonicalName Off + +# +# DocumentRoot: The directory out of which you will serve your +# documents. By default, all requests are taken from this directory, but +# symbolic links and aliases may be used to point to other locations. +# +DocumentRoot "/Library/WebServer/Documents" + +# +# Each directory to which Apache has access can be configured with respect +# to which services and features are allowed and/or disabled in that +# directory (and its subdirectories). +# +# First, we configure the "default" to be a very restrictive set of +# features. +# + + Options FollowSymLinks + AllowOverride None + + +# +# Note that from this point forward you must specifically allow +# particular features to be enabled - so if something's not working as +# you might expect, make sure that you have specifically enabled it +# below. +# + +# +# This should be changed to whatever you set DocumentRoot to. +# + + +# +# Possible values for the Options directive are "None", "All", +# or any combination of: +# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews +# +# Note that "MultiViews" must be named *explicitly* --- "Options All" +# doesn't give it to you. +# +# The Options directive is both complicated and important. Please see +# http://httpd.apache.org/docs-2.0/mod/core.html#options +# for more information. +# + Options Indexes FollowSymLinks MultiViews + +# +# AllowOverride controls what directives may be placed in .htaccess files. +# It can be "All", "None", or any combination of the keywords: +# Options FileInfo AuthConfig Limit +# + AllowOverride None + +# +# Controls who can get stuff from this server. +# + Order allow,deny + Allow from all + + + +# +# UserDir: The name of the directory that is appended onto a user's home +# directory if a ~user request is received. +# + + UserDir Sites + + +# +# Control access to UserDir directories. The following is an example +# for a site where these directories are restricted to read-only. +# + + AllowOverride FileInfo AuthConfig Limit Indexes + Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec + + Order allow,deny + Allow from all + + + Order deny,allow + Deny from all + + + +# +# DirectoryIndex: sets the file that Apache will serve if a directory +# is requested. +# +# The index.html.var file (a type-map) is used to deliver content- +# negotiated documents. The MultiViews Option can be used for the +# same purpose, but it is much slower. +# +DirectoryIndex index.html + +# +# AccessFileName: The name of the file to look for in each directory +# for additional configuration directives. See also the AllowOverride +# directive. +# +AccessFileName .htaccess + +# +# The following lines prevent .htaccess and .htpasswd files from being +# viewed by Web clients. +# + + Order allow,deny + Deny from all + + +# +# TypesConfig describes where the mime.types file (or equivalent) is +# to be found. +# +TypesConfig @FINKPREFIX@/etc/apache2/mime.types + +# +# DefaultType is the default MIME type the server will use for a document +# if it cannot otherwise determine one, such as from filename extensions. +# If your server contains mostly text or HTML documents, "text/plain" is +# a good value. If most of your content is binary, such as applications +# or images, you may want to use "application/octet-stream" instead to +# keep browsers from trying to display binary files as though they are +# text. +# +DefaultType text/plain + +# +# The mod_mime_magic module allows the server to use various hints from the +# contents of the file itself to determine its type. The MIMEMagicFile +# directive tells the module where the hint definitions are located. +# + + MIMEMagicFile @FINKPREFIX@/etc/apache2/magic + + +# +# HostnameLookups: Log the names of clients or just their IP addresses +# e.g., www.apache.org (on) or 204.62.129.132 (off). +# The default is off because it'd be overall better for the net if people +# had to knowingly turn this feature on, since enabling it means that +# each client request will result in AT LEAST one lookup request to the +# nameserver. +# +HostnameLookups Off + +# +# EnableMMAP: Control whether memory-mapping is used to deliver +# files (assuming that the underlying OS supports it). +# The default is on; turn this off if you serve from NFS-mounted +# filesystems. On some systems, turning it off (regardless of +# filesystem) can improve performance; for details, please see +# http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap +# +#EnableMMAP off + +# +# EnableSendfile: Control whether the sendfile kernel support is +# used to deliver files (assuming that the OS supports it). +# The default is on; turn this off if you serve from NFS-mounted +# filesystems. Please see +# http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile +# +#EnableSendfile off + +# +# ErrorLog: The location of the error log file. +# If you do not specify an ErrorLog directive within a +# container, error messages relating to that virtual host will be +# logged here. If you *do* define an error logfile for a +# container, that host's errors will be logged there and not here. +# +ErrorLog logs/error_log + +# +# LogLevel: Control the number of messages logged to the error_log. +# Possible values include: debug, info, notice, warn, error, crit, +# alert, emerg. +# +LogLevel warn + +# +# The following directives define some format nicknames for use with +# a CustomLog directive (see below). +# +LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined +LogFormat "%h %l %u %t \"%r\" %>s %b" common +LogFormat "%{Referer}i -> %U" referer +LogFormat "%{User-agent}i" agent + +# You need to enable mod_logio.c to use %I and %O +#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio + +# +# The location and format of the access logfile (Common Logfile Format). +# If you do not define any access logfiles within a +# container, they will be logged here. Contrariwise, if you *do* +# define per- access logfiles, transactions will be +# logged therein and *not* in this file. +# +CustomLog logs/access_log common + +# +# If you would like to have agent and referer logfiles, uncomment the +# following directives. +# +#CustomLog logs/referer_log referer +#CustomLog logs/agent_log agent + +# +# If you prefer a single logfile with access, agent, and referer information +# (Combined Logfile Format) you can use the following directive. +# +#CustomLog logs/access_log combined + +# +# ServerTokens +# This directive configures what you return as the Server HTTP response +# Header. The default is 'Full' which sends information about the OS-Type +# and compiled in modules. +# Set to one of: Full | OS | Minor | Minimal | Major | Prod +# where Full conveys the most information, and Prod the least. +# +ServerTokens Full + +# +# Optionally add a line containing the server version and virtual host +# name to server-generated pages (internal error documents, FTP directory +# listings, mod_status and mod_info output etc., but not CGI generated +# documents or custom error documents). +# Set to "EMail" to also include a mailto: link to the ServerAdmin. +# Set to one of: On | Off | EMail +# +ServerSignature On + +# +# Aliases: Add here as many aliases as you need (with no limit). The format is +# Alias fakename realname +# +# Note that if you include a trailing / on fakename then the server will +# require it to be present in the URL. So "/icons" isn't aliased in this +# example, only "/icons/". If the fakename is slash-terminated, then the +# realname must also be slash terminated, and if the fakename omits the +# trailing slash, the realname must also omit it. +# +# We include the /icons/ alias for FancyIndexed directory listings. If you +# do not use FancyIndexing, you may comment this out. +# +Alias /icons/ "@FINKPREFIX@/var/apache2/icons/" + + + Options Indexes MultiViews + AllowOverride None + Order allow,deny + Allow from all + + +# +# This should be changed to the ServerRoot/manual/. The alias provides +# the manual, even if you choose to move your DocumentRoot. You may comment +# this out if you do not care for the documentation. +# +Alias /manual "@FINKPREFIX@/var/apache2/manual" + + + Options Indexes FollowSymLinks MultiViews IncludesNoExec + AddOutputFilter Includes html + AllowOverride None + Order allow,deny + Allow from all + + +# +# ScriptAlias: This controls which directories contain server scripts. +# ScriptAliases are essentially the same as Aliases, except that +# documents in the realname directory are treated as applications and +# run by the server when requested rather than as documents sent to the client. +# The same rules about trailing "/" apply to ScriptAlias directives as to +# Alias. +# +ScriptAlias /cgi-bin/ "/Library/WebServer/CGI-Executables/" + +# Needed to search through fink's perlmodules + + SetEnv PERL5LIB @FINKPREFIX@/lib/perl5 + + + +# +# Additional to mod_cgid.c settings, mod_cgid has Scriptsock +# for setting UNIX socket for communicating with cgid. +# +#Scriptsock logs/cgisock + + +# +# "@FINKPREFIX@/var/apache2/cgi-bin" should be changed to whatever your ScriptAliased +# CGI directory exists, if you have that configured. +# + + AllowOverride None + Options None + Order allow,deny + Allow from all + + +# +# Redirect allows you to tell clients about documents which used to exist in +# your server's namespace, but do not anymore. This allows you to tell the +# clients where to look for the relocated document. +# Example: +# Redirect permanent /foo http://www.example.com/bar + +# +# Directives controlling the display of server-generated directory listings. +# + +# +# IndexOptions: Controls the appearance of server-generated directory +# listings. +# +IndexOptions FancyIndexing VersionSort + +# +# AddIcon* directives tell the server which icon to show for different +# files or filename extensions. These are only displayed for +# FancyIndexed directories. +# +AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip + +AddIconByType (TXT,/icons/text.gif) text/* +AddIconByType (IMG,/icons/image2.gif) image/* +AddIconByType (SND,/icons/sound2.gif) audio/* +AddIconByType (VID,/icons/movie.gif) video/* + +AddIcon /icons/binary.gif .bin .exe +AddIcon /icons/binhex.gif .hqx +AddIcon /icons/tar.gif .tar +AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv +AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip +AddIcon /icons/a.gif .ps .ai .eps +AddIcon /icons/layout.gif .html .shtml .htm .pdf +AddIcon /icons/text.gif .txt +AddIcon /icons/c.gif .c +AddIcon /icons/p.gif .pl .py +AddIcon /icons/f.gif .for +AddIcon /icons/dvi.gif .dvi +AddIcon /icons/uuencoded.gif .uu +AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl +AddIcon /icons/tex.gif .tex +AddIcon /icons/bomb.gif core + +AddIcon /icons/back.gif .. +AddIcon /icons/hand.right.gif README +AddIcon /icons/folder.gif ^^DIRECTORY^^ +AddIcon /icons/blank.gif ^^BLANKICON^^ + +# +# DefaultIcon is which icon to show for files which do not have an icon +# explicitly set. +# +DefaultIcon /icons/unknown.gif + +# +# AddDescription allows you to place a short description after a file in +# server-generated indexes. These are only displayed for FancyIndexed +# directories. +# Format: AddDescription "description" filename +# +#AddDescription "GZIP compressed document" .gz +#AddDescription "tar archive" .tar +#AddDescription "GZIP compressed tar archive" .tgz + +# +# ReadmeName is the name of the README file the server will look for by +# default, and append to directory listings. +# +# HeaderName is the name of a file which should be prepended to +# directory indexes. +ReadmeName README.html +HeaderName HEADER.html + +# +# IndexIgnore is a set of filenames which directory indexing should ignore +# and not include in the listing. Shell-style wildcarding is permitted. +# +IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t + +# +# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress +# information on the fly. Note: Not all browsers support this. +# Despite the name similarity, the following Add* directives have nothing +# to do with the FancyIndexing customization directives above. +# +AddEncoding x-compress Z +AddEncoding x-gzip gz tgz + +# +# DefaultLanguage and AddLanguage allows you to specify the language of +# a document. You can then use content negotiation to give a browser a +# file in a language the user can understand. +# +# Specify a default language. This means that all data +# going out without a specific language tag (see below) will +# be marked with this one. You probably do NOT want to set +# this unless you are sure it is correct for all cases. +# +# * It is generally better to not mark a page as +# * being a certain language than marking it with the wrong +# * language! +# +# DefaultLanguage nl +# +# Note 1: The suffix does not have to be the same as the language +# keyword --- those with documents in Polish (whose net-standard +# language code is pl) may wish to use "AddLanguage pl .po" to +# avoid the ambiguity with the common suffix for perl scripts. +# +# Note 2: The example entries below illustrate that in some cases +# the two character 'Language' abbreviation is not identical to +# the two character 'Country' code for its country, +# E.g. 'Danmark/dk' versus 'Danish/da'. +# +# Note 3: In the case of 'ltz' we violate the RFC by using a three char +# specifier. There is 'work in progress' to fix this and get +# the reference data for rfc1766 cleaned up. +# +# Danish (da) - Dutch (nl) - English (en) - Estonian (et) +# French (fr) - German (de) - Greek-Modern (el) +# Italian (it) - Norwegian (no) - Norwegian Nynorsk (nn) - Korean (ko) +# Portugese (pt) - Luxembourgeois* (ltz) +# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz) +# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja) +# Russian (ru) - Croatian (hr) +# +AddLanguage da .dk +AddLanguage nl .nl +AddLanguage en .en +AddLanguage et .et +AddLanguage fr .fr +AddLanguage de .de +AddLanguage he .he +AddLanguage el .el +AddLanguage it .it +AddLanguage ja .ja +AddLanguage pl .po +AddLanguage ko .ko +AddLanguage pt .pt +AddLanguage nn .nn +AddLanguage no .no +AddLanguage pt-br .pt-br +AddLanguage ltz .ltz +AddLanguage ca .ca +AddLanguage es .es +AddLanguage sv .sv +AddLanguage cz .cz +AddLanguage ru .ru +AddLanguage tw .tw +AddLanguage zh-tw .tw +AddLanguage hr .hr + +# +# LanguagePriority allows you to give precedence to some languages +# in case of a tie during content negotiation. +# +# Just list the languages in decreasing order of preference. We have +# more or less alphabetized them here. You probably want to change this. +# +LanguagePriority en da nl et fr de el it ja ko no pl pt pt-br ltz ca es sv tw + +# +# ForceLanguagePriority allows you to serve a result page rather than +# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback) +# [in case no accepted languages matched the available variants] +# +ForceLanguagePriority Prefer Fallback + +# +# Specify a default charset for all pages sent out. This is +# always a good idea and opens the door for future internationalisation +# of your web site, should you ever want it. Specifying it as +# a default does little harm; as the standard dictates that a page +# is in iso-8859-1 (latin1) unless specified otherwise i.e. you +# are merely stating the obvious. There are also some security +# reasons in browsers, related to javascript and URL parsing +# which encourage you to always set a default char set. +# +AddDefaultCharset ISO-8859-1 + +# +# Commonly used filename extensions to character sets. You probably +# want to avoid clashes with the language extensions, unless you +# are good at carefully testing your setup after each change. +# See http://www.iana.org/assignments/character-sets for the +# official list of charset names and their respective RFCs. +# +AddCharset ISO-8859-1 .iso8859-1 .latin1 +AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen +AddCharset ISO-8859-3 .iso8859-3 .latin3 +AddCharset ISO-8859-4 .iso8859-4 .latin4 +AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru +AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb +AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk +AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb +AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk +AddCharset ISO-2022-JP .iso2022-jp .jis +AddCharset ISO-2022-KR .iso2022-kr .kis +AddCharset ISO-2022-CN .iso2022-cn .cis +AddCharset Big5 .Big5 .big5 +# For russian, more than one charset is used (depends on client, mostly): +AddCharset WINDOWS-1251 .cp-1251 .win-1251 +AddCharset CP866 .cp866 +AddCharset KOI8-r .koi8-r .koi8-ru +AddCharset KOI8-ru .koi8-uk .ua +AddCharset ISO-10646-UCS-2 .ucs2 +AddCharset ISO-10646-UCS-4 .ucs4 +AddCharset UTF-8 .utf8 + +# The set below does not map to a specific (iso) standard +# but works on a fairly wide range of browsers. Note that +# capitalization actually matters (it should not, but it +# does for some browsers). +# +# See http://www.iana.org/assignments/character-sets +# for a list of sorts. But browsers support few. +# +AddCharset GB2312 .gb2312 .gb +AddCharset utf-7 .utf7 +AddCharset utf-8 .utf8 +AddCharset big5 .big5 .b5 +AddCharset EUC-TW .euc-tw +AddCharset EUC-JP .euc-jp +AddCharset EUC-KR .euc-kr +AddCharset shift_jis .sjis + +# +# AddType allows you to add to or override the MIME configuration +# file mime.types for specific file types. +# +AddType application/x-tar .tgz +AddType image/x-icon .ico + +# +# AddHandler allows you to map certain file extensions to "handlers": +# actions unrelated to filetype. These can be either built into the server +# or added with the Action directive (see below) +# +# To use CGI scripts outside of ScriptAliased directories: +# (You will also need to add "ExecCGI" to the "Options" directive.) +# +#AddHandler cgi-script .cgi + +# +# For files that include their own HTTP headers: +# +#AddHandler send-as-is asis + +# +# For server-parsed imagemap files: +# +#AddHandler imap-file map + +# +# For type maps (negotiated resources): +# (This is enabled by default to allow the Apache "It Worked" page +# to be distributed in multiple languages.) +# +AddHandler type-map var + +# +# Filters allow you to process content before it is sent to the client. +# +# To parse .shtml files for server-side includes (SSI): +# (You will also need to add "Includes" to the "Options" directive.) +# +#AddType text/html .shtml +#AddOutputFilter INCLUDES .shtml + +# +# Action lets you define media types that will execute a script whenever +# a matching file is called. This eliminates the need for repeated URL +# pathnames for oft-used CGI file processors. +# Format: Action media/type /cgi-script/location +# Format: Action handler-name /cgi-script/location +# + +# +# Customizable error responses come in three flavors: +# 1) plain text 2) local redirects 3) external redirects +# +# Some examples: +#ErrorDocument 500 "The server made a boo boo." +#ErrorDocument 404 /missing.html +#ErrorDocument 404 "/cgi-bin/missing_handler.pl" +#ErrorDocument 402 http://www.example.com/subscription_info.html +# + +# +# Putting this all together, we can internationalize error responses. +# +# We use Alias to redirect any /error/HTTP_.html.var response to +# our collection of by-error message multi-language collections. We use +# includes to substitute the appropriate text. +# +# You can modify the messages' appearance without changing any of the +# default HTTP_.html.var files by adding the line: +# +# Alias /error/include/ "/your/include/path/" +# +# which allows you to create your own set of files by starting with the +# @FINKPREFIX@/var/apache2/error/include/ files and copying them to /your/include/path/, +# even on a per-VirtualHost basis. The default include files will display +# your Apache version number and your ServerAdmin email address regardless +# of the setting of ServerSignature. +# +# The internationalized error documents require mod_alias, mod_include +# and mod_negotiation. To activate them, uncomment the following 30 lines. + +# Alias /error/ "@FINKPREFIX@/var/apache2/error/" +# +# +# AllowOverride None +# Options IncludesNoExec +# AddOutputFilter Includes html +# AddHandler type-map var +# Order allow,deny +# Allow from all +# LanguagePriority en de es fr it nl sv +# ForceLanguagePriority Prefer Fallback +# +# +# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var +# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var +# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var +# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var +# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var +# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var +# ErrorDocument 410 /error/HTTP_GONE.html.var +# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var +# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var +# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var +# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var +# ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var +# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var +# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var +# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var +# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var +# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var + + +# +# The following directives modify normal HTTP response behavior to +# handle known problems with browser implementations. +# +BrowserMatch "Mozilla/2" nokeepalive +BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 +BrowserMatch "RealPlayer 4\.0" force-response-1.0 +BrowserMatch "Java/1\.0" force-response-1.0 +BrowserMatch "JDK/1\.0" force-response-1.0 + +# +# The following directive disables redirects on non-GET requests for +# a directory that does not include the trailing slash. This fixes a +# problem with Microsoft WebFolders which does not appropriately handle +# redirects for folders with DAV methods. +# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV. +# +BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully +BrowserMatch "^WebDrive" redirect-carefully +BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully +BrowserMatch "^gnome-vfs" redirect-carefully + +# +# Allow server status reports generated by mod_status, +# with the URL of http://servername/server-status +# Change the ".example.com" to match your domain to enable. +# +# +# SetHandler server-status +# Order deny,allow +# Deny from all +# Allow from .example.com +# + +# +# Allow remote server configuration reports, with the URL of +# http://servername/server-info (requires that mod_info.c be loaded). +# Change the ".example.com" to match your domain to enable. +# +# +# SetHandler server-info +# Order deny,allow +# Deny from all +# Allow from .example.com +# + +# +# Proxy Server directives. Uncomment the following lines to +# enable the proxy server: +# +# +#ProxyRequests On +# +# +# Order deny,allow +# Deny from all +# Allow from .example.com +# + +# +# Enable/disable the handling of HTTP/1.1 "Via:" headers. +# ("Full" adds the server version; "Block" removes all outgoing Via: headers) +# Set to one of: Off | On | Full | Block +# +#ProxyVia On + +# +# To enable the cache as well, edit and uncomment the following lines: +# (no cacheing without CacheRoot) +# +#CacheRoot "@FINKPREFIX@/var/apache2/proxy" +#CacheSize 5 +#CacheGcInterval 4 +#CacheMaxExpire 24 +#CacheLastModifiedFactor 0.1 +#CacheDefaultExpire 1 +#NoCache a-domain.com another-domain.edu joes.garage-sale.com + +# +# End of proxy directives. + +# +# Bring in additional module-specific configurations +# + + Include @FINKPREFIX@/etc/apache2/ssl.conf + + + +### Section 3: Virtual Hosts +# +# VirtualHost: If you want to maintain multiple domains/hostnames on your +# machine you can setup VirtualHost containers for them. Most configurations +# use only name-based virtual hosts so the server doesn't need to worry about +# IP addresses. This is indicated by the asterisks in the directives below. +# +# Please see the documentation at +# +# for further details before you try to setup virtual hosts. +# +# You may use the command line option '-S' to verify your virtual host +# configuration. + +# +# Use name-based virtual hosting. +# +#NameVirtualHost * + +# +# VirtualHost example: +# Almost any Apache directive may go into a VirtualHost container. +# The first VirtualHost section is used for requests without a known +# server name. +# +# +# ServerAdmin webmaster@dummy-host.example.com +# DocumentRoot /www/docs/dummy-host.example.com +# ServerName dummy-host.example.com +# ErrorLog logs/dummy-host.example.com-error_log +# CustomLog logs/dummy-host.example.com-access_log common +# +Include /private/etc/httpd/users diff -ruN httpd-2.0.48.orig/httpd.conf.fink httpd-2.0.48/httpd.conf.fink --- httpd-2.0.48.orig/httpd.conf.fink Wed Dec 31 17:00:00 1969 +++ httpd-2.0.48/httpd.conf.fink Fri Oct 31 10:33:25 2003 @@ -0,0 +1,1109 @@ +# +# Based upon the NCSA server configuration files originally by Rob McCool. +# +# This is the main Apache server configuration file. It contains the +# configuration directives that give the server its instructions. +# See for detailed information about +# the directives. +# +# Do NOT simply read the instructions in here without understanding +# what they do. They're here only as hints or reminders. If you are unsure +# consult the online docs. You have been warned. +# +# The configuration directives are grouped into three basic sections: +# 1. Directives that control the operation of the Apache server process as a +# whole (the 'global environment'). +# 2. Directives that define the parameters of the 'main' or 'default' server, +# which responds to requests that aren't handled by a virtual host. +# These directives also provide default values for the settings +# of all virtual hosts. +# 3. Settings for virtual hosts, which allow Web requests to be sent to +# different IP addresses or hostnames and have them handled by the +# same Apache server process. +# +# Configuration and logfile names: If the filenames you specify for many +# of the server's control files begin with "/" (or "drive:/" for Win32), the +# server will use that explicit path. If the filenames do *not* begin +# with "/", the value of ServerRoot is prepended -- so "logs/foo.log" +# with ServerRoot set to "@FINKPREFIX@/var/apache2" will be interpreted by the +# server as "@FINKPREFIX@/var/apache2/logs/foo.log". +# + +### Section 1: Global Environment +# +# The directives in this section affect the overall operation of Apache, +# such as the number of concurrent requests it can handle or where it +# can find its configuration files. +# + +# +# ServerRoot: The top of the directory tree under which the server's +# configuration, error, and log files are kept. +# +# NOTE! If you intend to place this on an NFS (or otherwise network) +# mounted filesystem then please read the LockFile documentation (available +# at ); +# you will save yourself a lot of trouble. +# +# Do NOT add a slash at the end of the directory path. +# +ServerRoot "@FINKPREFIX@/var/apache2" + +# +# The accept serialization lock file MUST BE STORED ON A LOCAL DISK. +# + + +#LockFile logs/accept.lock + + + +# +# ScoreBoardFile: File used to store internal server process information. +# If unspecified (the default), the scoreboard will be stored in an +# anonymous shared memory segment, and will be unavailable to third-party +# applications. +# If specified, ensure that no two invocations of Apache share the same +# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK. +# + + +#ScoreBoardFile logs/apache_runtime_status + + + + +# +# PidFile: The file in which the server should record its process +# identification number when it starts. +# + +PidFile logs/httpd.pid + + +# +# Timeout: The number of seconds before receives and sends time out. +# +Timeout 300 + +# +# KeepAlive: Whether or not to allow persistent connections (more than +# one request per connection). Set to "Off" to deactivate. +# +KeepAlive On + +# +# MaxKeepAliveRequests: The maximum number of requests to allow +# during a persistent connection. Set to 0 to allow an unlimited amount. +# We recommend you leave this number high, for maximum performance. +# +MaxKeepAliveRequests 100 + +# +# KeepAliveTimeout: Number of seconds to wait for the next request from the +# same client on the same connection. +# +KeepAliveTimeout 15 + +## +## Server-Pool Size Regulation (MPM specific) +## + +# prefork MPM +# StartServers: number of server processes to start +# MinSpareServers: minimum number of server processes which are kept spare +# MaxSpareServers: maximum number of server processes which are kept spare +# MaxClients: maximum number of server processes allowed to start +# MaxRequestsPerChild: maximum number of requests a server process serves + +StartServers 5 +MinSpareServers 5 +MaxSpareServers 10 +MaxClients 150 +MaxRequestsPerChild 0 + + +# worker MPM +# StartServers: initial number of server processes to start +# MaxClients: maximum number of simultaneous client connections +# MinSpareThreads: minimum number of worker threads which are kept spare +# MaxSpareThreads: maximum number of worker threads which are kept spare +# ThreadsPerChild: constant number of worker threads in each server process +# MaxRequestsPerChild: maximum number of requests a server process serves + +StartServers 2 +MaxClients 150 +MinSpareThreads 25 +MaxSpareThreads 75 +ThreadsPerChild 25 +MaxRequestsPerChild 0 + + +# perchild MPM +# NumServers: constant number of server processes +# StartThreads: initial number of worker threads in each server process +# MinSpareThreads: minimum number of worker threads which are kept spare +# MaxSpareThreads: maximum number of worker threads which are kept spare +# MaxThreadsPerChild: maximum number of worker threads in each server process +# MaxRequestsPerChild: maximum number of connections per server process + +NumServers 5 +StartThreads 5 +MinSpareThreads 5 +MaxSpareThreads 10 +MaxThreadsPerChild 20 +MaxRequestsPerChild 0 + + +# WinNT MPM +# ThreadsPerChild: constant number of worker threads in the server process +# MaxRequestsPerChild: maximum number of requests a server process serves + +ThreadsPerChild 250 +MaxRequestsPerChild 0 + + +# BeOS MPM +# StartThreads: how many threads do we initially spawn? +# MaxClients: max number of threads we can have (1 thread == 1 client) +# MaxRequestsPerThread: maximum number of requests each thread will process + +StartThreads 10 +MaxClients 50 +MaxRequestsPerThread 10000 + + +# NetWare MPM +# ThreadStackSize: Stack size allocated for each worker thread +# StartThreads: Number of worker threads launched at server startup +# MinSpareThreads: Minimum number of idle threads, to handle request spikes +# MaxSpareThreads: Maximum number of idle threads +# MaxThreads: Maximum number of worker threads alive at the same time +# MaxRequestsPerChild: Maximum number of requests a thread serves. It is +# recommended that the default value of 0 be set for this +# directive on NetWare. This will allow the thread to +# continue to service requests indefinitely. + +ThreadStackSize 65536 +StartThreads 250 +MinSpareThreads 25 +MaxSpareThreads 250 +MaxThreads 1000 +MaxRequestsPerChild 0 + + +# OS/2 MPM +# StartServers: Number of server processes to maintain +# MinSpareThreads: Minimum number of idle threads per process, +# to handle request spikes +# MaxSpareThreads: Maximum number of idle threads per process +# MaxRequestsPerChild: Maximum number of connections per server process + +StartServers 2 +MinSpareThreads 5 +MaxSpareThreads 10 +MaxRequestsPerChild 0 + + +# +# Listen: Allows you to bind Apache to specific IP addresses and/or +# ports, instead of the default. See also the +# directive. +# +# Change this to Listen on specific IP addresses as shown below to +# prevent Apache from glomming onto all bound IP addresses (0.0.0.0) +# +#Listen 12.34.56.78:80 + +Listen 80 + +# +# Dynamic Shared Object (DSO) Support +# +# To be able to use the functionality of a module which was built as a DSO you +# have to place corresponding `LoadModule' lines at this location so the +# directives contained in it are actually available _before_ they are used. +# Statically compiled modules (those listed by `httpd -l') do not need +# to be loaded here. +# +# Example: +# LoadModule foo_module modules/mod_foo.so +# +LoadModule access_module @FINKPREFIX@/lib/apache2/modules/mod_access.so +LoadModule auth_module @FINKPREFIX@/lib/apache2/modules/mod_auth.so +LoadModule file_cache_module @FINKPREFIX@/lib/apache2/modules/mod_file_cache.so +LoadModule echo_module @FINKPREFIX@/lib/apache2/modules/mod_echo.so +LoadModule charset_lite_module @FINKPREFIX@/lib/apache2/modules/mod_charset_lite.so +LoadModule cache_module @FINKPREFIX@/lib/apache2/modules/mod_cache.so +LoadModule disk_cache_module @FINKPREFIX@/lib/apache2/modules/mod_disk_cache.so +LoadModule mem_cache_module @FINKPREFIX@/lib/apache2/modules/mod_mem_cache.so +LoadModule example_module @FINKPREFIX@/lib/apache2/modules/mod_example.so +LoadModule case_filter_module @FINKPREFIX@/lib/apache2/modules/mod_case_filter.so +LoadModule case_filter_in_module @FINKPREFIX@/lib/apache2/modules/mod_case_filter_in.so +LoadModule ext_filter_module @FINKPREFIX@/lib/apache2/modules/mod_ext_filter.so +LoadModule include_module @FINKPREFIX@/lib/apache2/modules/mod_include.so +LoadModule deflate_module @FINKPREFIX@/lib/apache2/modules/mod_deflate.so +LoadModule log_config_module @FINKPREFIX@/lib/apache2/modules/mod_log_config.so +LoadModule logio_module @FINKPREFIX@/lib/apache2/modules/mod_logio.so +LoadModule env_module @FINKPREFIX@/lib/apache2/modules/mod_env.so +LoadModule cern_meta_module @FINKPREFIX@/lib/apache2/modules/mod_cern_meta.so +LoadModule setenvif_module @FINKPREFIX@/lib/apache2/modules/mod_setenvif.so +LoadModule optional_hook_export_module @FINKPREFIX@/lib/apache2/modules/mod_optional_hook_export.so +LoadModule optional_hook_import_module @FINKPREFIX@/lib/apache2/modules/mod_optional_hook_import.so +LoadModule optional_fn_import_module @FINKPREFIX@/lib/apache2/modules/mod_optional_fn_import.so +LoadModule optional_fn_export_module @FINKPREFIX@/lib/apache2/modules/mod_optional_fn_export.so +LoadModule mime_module @FINKPREFIX@/lib/apache2/modules/mod_mime.so +LoadModule dav_module @FINKPREFIX@/lib/apache2/modules/mod_dav.so +LoadModule status_module @FINKPREFIX@/lib/apache2/modules/mod_status.so +LoadModule autoindex_module @FINKPREFIX@/lib/apache2/modules/mod_autoindex.so +LoadModule asis_module @FINKPREFIX@/lib/apache2/modules/mod_asis.so +LoadModule cgi_module @FINKPREFIX@/lib/apache2/modules/mod_cgi.so +LoadModule dav_fs_module @FINKPREFIX@/lib/apache2/modules/mod_dav_fs.so +LoadModule negotiation_module @FINKPREFIX@/lib/apache2/modules/mod_negotiation.so +LoadModule dir_module @FINKPREFIX@/lib/apache2/modules/mod_dir.so +LoadModule imap_module @FINKPREFIX@/lib/apache2/modules/mod_imap.so +LoadModule userdir_module @FINKPREFIX@/lib/apache2/modules/mod_userdir.so +LoadModule alias_module @FINKPREFIX@/lib/apache2/modules/mod_alias.so + +# +# ExtendedStatus controls whether Apache will generate "full" status +# information (ExtendedStatus On) or just basic information (ExtendedStatus +# Off) when the "server-status" handler is called. The default is Off. +# +#ExtendedStatus On + +### Section 2: 'Main' server configuration +# +# The directives in this section set up the values used by the 'main' +# server, which responds to any requests that aren't handled by a +# definition. These values also provide defaults for +# any containers you may define later in the file. +# +# All of these directives may appear inside containers, +# in which case these default settings will be overridden for the +# virtual host being defined. +# + + + +# +# If you wish httpd to run as a different user or group, you must run +# httpd as root initially and it will switch. +# +# User/Group: The name (or #number) of the user/group to run httpd as. +# . On SCO (ODT 3) use "User nouser" and "Group nogroup". +# . On HPUX you may not be able to use shared memory as nobody, and the +# suggested workaround is to create a user www and use that user. +# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET) +# when the value of (unsigned)Group is above 60000; +# don't use Group #-1 on these systems! +# +User www +Group www + + + +# +# ServerAdmin: Your address, where problems with the server should be +# e-mailed. This address appears on some server-generated pages, such +# as error documents. e.g. admin@your-domain.com +# +ServerAdmin you@your.address + +# +# ServerName gives the name and port that the server uses to identify itself. +# This can often be determined automatically, but we recommend you specify +# it explicitly to prevent problems during startup. +# +# If this is not set to valid DNS name for your host, server-generated +# redirections will not work. See also the UseCanonicalName directive. +# +# If your host doesn't have a registered DNS name, enter its IP address here. +# You will have to access it by its address anyway, and this will make +# redirections work in a sensible way. +# +#ServerName new.host.name:80 + +# +# UseCanonicalName: Determines how Apache constructs self-referencing +# URLs and the SERVER_NAME and SERVER_PORT variables. +# When set "Off", Apache will use the Hostname and Port supplied +# by the client. When set "On", Apache will use the value of the +# ServerName directive. +# +UseCanonicalName Off + +# +# DocumentRoot: The directory out of which you will serve your +# documents. By default, all requests are taken from this directory, but +# symbolic links and aliases may be used to point to other locations. +# +DocumentRoot "/Library/WebServer/Documents" + +# +# Each directory to which Apache has access can be configured with respect +# to which services and features are allowed and/or disabled in that +# directory (and its subdirectories). +# +# First, we configure the "default" to be a very restrictive set of +# features. +# + + Options FollowSymLinks + AllowOverride None + + +# +# Note that from this point forward you must specifically allow +# particular features to be enabled - so if something's not working as +# you might expect, make sure that you have specifically enabled it +# below. +# + +# +# This should be changed to whatever you set DocumentRoot to. +# + + +# +# Possible values for the Options directive are "None", "All", +# or any combination of: +# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews +# +# Note that "MultiViews" must be named *explicitly* --- "Options All" +# doesn't give it to you. +# +# The Options directive is both complicated and important. Please see +# http://httpd.apache.org/docs-2.0/mod/core.html#options +# for more information. +# + Options Indexes FollowSymLinks MultiViews + +# +# AllowOverride controls what directives may be placed in .htaccess files. +# It can be "All", "None", or any combination of the keywords: +# Options FileInfo AuthConfig Limit +# + AllowOverride None + +# +# Controls who can get stuff from this server. +# + Order allow,deny + Allow from all + + + +# +# UserDir: The name of the directory that is appended onto a user's home +# directory if a ~user request is received. +# + + UserDir Sites + + +# +# Control access to UserDir directories. The following is an example +# for a site where these directories are restricted to read-only. +# + + AllowOverride FileInfo AuthConfig Limit Indexes + Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec + + Order allow,deny + Allow from all + + + Order deny,allow + Deny from all + + + +# +# DirectoryIndex: sets the file that Apache will serve if a directory +# is requested. +# +# The index.html.var file (a type-map) is used to deliver content- +# negotiated documents. The MultiViews Option can be used for the +# same purpose, but it is much slower. +# +DirectoryIndex index.html + +# +# AccessFileName: The name of the file to look for in each directory +# for additional configuration directives. See also the AllowOverride +# directive. +# +AccessFileName .htaccess + +# +# The following lines prevent .htaccess and .htpasswd files from being +# viewed by Web clients. +# + + Order allow,deny + Deny from all + + +# +# TypesConfig describes where the mime.types file (or equivalent) is +# to be found. +# +TypesConfig @FINKPREFIX@/etc/apache2/mime.types + +# +# DefaultType is the default MIME type the server will use for a document +# if it cannot otherwise determine one, such as from filename extensions. +# If your server contains mostly text or HTML documents, "text/plain" is +# a good value. If most of your content is binary, such as applications +# or images, you may want to use "application/octet-stream" instead to +# keep browsers from trying to display binary files as though they are +# text. +# +DefaultType text/plain + +# +# The mod_mime_magic module allows the server to use various hints from the +# contents of the file itself to determine its type. The MIMEMagicFile +# directive tells the module where the hint definitions are located. +# + + MIMEMagicFile @FINKPREFIX@/etc/apache2/magic + + +# +# HostnameLookups: Log the names of clients or just their IP addresses +# e.g., www.apache.org (on) or 204.62.129.132 (off). +# The default is off because it'd be overall better for the net if people +# had to knowingly turn this feature on, since enabling it means that +# each client request will result in AT LEAST one lookup request to the +# nameserver. +# +HostnameLookups Off + +# +# EnableMMAP: Control whether memory-mapping is used to deliver +# files (assuming that the underlying OS supports it). +# The default is on; turn this off if you serve from NFS-mounted +# filesystems. On some systems, turning it off (regardless of +# filesystem) can improve performance; for details, please see +# http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap +# +#EnableMMAP off + +# +# EnableSendfile: Control whether the sendfile kernel support is +# used to deliver files (assuming that the OS supports it). +# The default is on; turn this off if you serve from NFS-mounted +# filesystems. Please see +# http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile +# +#EnableSendfile off + +# +# ErrorLog: The location of the error log file. +# If you do not specify an ErrorLog directive within a +# container, error messages relating to that virtual host will be +# logged here. If you *do* define an error logfile for a +# container, that host's errors will be logged there and not here. +# +ErrorLog logs/error_log + +# +# LogLevel: Control the number of messages logged to the error_log. +# Possible values include: debug, info, notice, warn, error, crit, +# alert, emerg. +# +LogLevel warn + +# +# The following directives define some format nicknames for use with +# a CustomLog directive (see below). +# +LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined +LogFormat "%h %l %u %t \"%r\" %>s %b" common +LogFormat "%{Referer}i -> %U" referer +LogFormat "%{User-agent}i" agent + +# You need to enable mod_logio.c to use %I and %O +#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio + +# +# The location and format of the access logfile (Common Logfile Format). +# If you do not define any access logfiles within a +# container, they will be logged here. Contrariwise, if you *do* +# define per- access logfiles, transactions will be +# logged therein and *not* in this file. +# +CustomLog logs/access_log common + +# +# If you would like to have agent and referer logfiles, uncomment the +# following directives. +# +#CustomLog logs/referer_log referer +#CustomLog logs/agent_log agent + +# +# If you prefer a single logfile with access, agent, and referer information +# (Combined Logfile Format) you can use the following directive. +# +#CustomLog logs/access_log combined + +# +# ServerTokens +# This directive configures what you return as the Server HTTP response +# Header. The default is 'Full' which sends information about the OS-Type +# and compiled in modules. +# Set to one of: Full | OS | Minor | Minimal | Major | Prod +# where Full conveys the most information, and Prod the least. +# +ServerTokens Full + +# +# Optionally add a line containing the server version and virtual host +# name to server-generated pages (internal error documents, FTP directory +# listings, mod_status and mod_info output etc., but not CGI generated +# documents or custom error documents). +# Set to "EMail" to also include a mailto: link to the ServerAdmin. +# Set to one of: On | Off | EMail +# +ServerSignature On + +# +# Aliases: Add here as many aliases as you need (with no limit). The format is +# Alias fakename realname +# +# Note that if you include a trailing / on fakename then the server will +# require it to be present in the URL. So "/icons" isn't aliased in this +# example, only "/icons/". If the fakename is slash-terminated, then the +# realname must also be slash terminated, and if the fakename omits the +# trailing slash, the realname must also omit it. +# +# We include the /icons/ alias for FancyIndexed directory listings. If you +# do not use FancyIndexing, you may comment this out. +# +Alias /icons/ "@FINKPREFIX@/var/apache2/icons/" + + + Options Indexes MultiViews + AllowOverride None + Order allow,deny + Allow from all + + +# +# This should be changed to the ServerRoot/manual/. The alias provides +# the manual, even if you choose to move your DocumentRoot. You may comment +# this out if you do not care for the documentation. +# +Alias /manual "@FINKPREFIX@/var/apache2/manual" + + + Options Indexes FollowSymLinks MultiViews IncludesNoExec + AddOutputFilter Includes html + AllowOverride None + Order allow,deny + Allow from all + + +# +# ScriptAlias: This controls which directories contain server scripts. +# ScriptAliases are essentially the same as Aliases, except that +# documents in the realname directory are treated as applications and +# run by the server when requested rather than as documents sent to the client. +# The same rules about trailing "/" apply to ScriptAlias directives as to +# Alias. +# +ScriptAlias /cgi-bin/ "/Library/WebServer/CGI-Executables/" + +# Needed to search through fink's perlmodules + + SetEnv PERL5LIB @FINKPREFIX@/lib/perl5 + + + +# +# Additional to mod_cgid.c settings, mod_cgid has Scriptsock +# for setting UNIX socket for communicating with cgid. +# +#Scriptsock logs/cgisock + + +# +# "@FINKPREFIX@/var/apache2/cgi-bin" should be changed to whatever your ScriptAliased +# CGI directory exists, if you have that configured. +# + + AllowOverride None + Options None + Order allow,deny + Allow from all + + +# +# Redirect allows you to tell clients about documents which used to exist in +# your server's namespace, but do not anymore. This allows you to tell the +# clients where to look for the relocated document. +# Example: +# Redirect permanent /foo http://www.example.com/bar + +# +# Directives controlling the display of server-generated directory listings. +# + +# +# IndexOptions: Controls the appearance of server-generated directory +# listings. +# +IndexOptions FancyIndexing VersionSort + +# +# AddIcon* directives tell the server which icon to show for different +# files or filename extensions. These are only displayed for +# FancyIndexed directories. +# +AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip + +AddIconByType (TXT,/icons/text.gif) text/* +AddIconByType (IMG,/icons/image2.gif) image/* +AddIconByType (SND,/icons/sound2.gif) audio/* +AddIconByType (VID,/icons/movie.gif) video/* + +AddIcon /icons/binary.gif .bin .exe +AddIcon /icons/binhex.gif .hqx +AddIcon /icons/tar.gif .tar +AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv +AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip +AddIcon /icons/a.gif .ps .ai .eps +AddIcon /icons/layout.gif .html .shtml .htm .pdf +AddIcon /icons/text.gif .txt +AddIcon /icons/c.gif .c +AddIcon /icons/p.gif .pl .py +AddIcon /icons/f.gif .for +AddIcon /icons/dvi.gif .dvi +AddIcon /icons/uuencoded.gif .uu +AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl +AddIcon /icons/tex.gif .tex +AddIcon /icons/bomb.gif core + +AddIcon /icons/back.gif .. +AddIcon /icons/hand.right.gif README +AddIcon /icons/folder.gif ^^DIRECTORY^^ +AddIcon /icons/blank.gif ^^BLANKICON^^ + +# +# DefaultIcon is which icon to show for files which do not have an icon +# explicitly set. +# +DefaultIcon /icons/unknown.gif + +# +# AddDescription allows you to place a short description after a file in +# server-generated indexes. These are only displayed for FancyIndexed +# directories. +# Format: AddDescription "description" filename +# +#AddDescription "GZIP compressed document" .gz +#AddDescription "tar archive" .tar +#AddDescription "GZIP compressed tar archive" .tgz + +# +# ReadmeName is the name of the README file the server will look for by +# default, and append to directory listings. +# +# HeaderName is the name of a file which should be prepended to +# directory indexes. +ReadmeName README.html +HeaderName HEADER.html + +# +# IndexIgnore is a set of filenames which directory indexing should ignore +# and not include in the listing. Shell-style wildcarding is permitted. +# +IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t + +# +# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress +# information on the fly. Note: Not all browsers support this. +# Despite the name similarity, the following Add* directives have nothing +# to do with the FancyIndexing customization directives above. +# +AddEncoding x-compress Z +AddEncoding x-gzip gz tgz + +# +# DefaultLanguage and AddLanguage allows you to specify the language of +# a document. You can then use content negotiation to give a browser a +# file in a language the user can understand. +# +# Specify a default language. This means that all data +# going out without a specific language tag (see below) will +# be marked with this one. You probably do NOT want to set +# this unless you are sure it is correct for all cases. +# +# * It is generally better to not mark a page as +# * being a certain language than marking it with the wrong +# * language! +# +# DefaultLanguage nl +# +# Note 1: The suffix does not have to be the same as the language +# keyword --- those with documents in Polish (whose net-standard +# language code is pl) may wish to use "AddLanguage pl .po" to +# avoid the ambiguity with the common suffix for perl scripts. +# +# Note 2: The example entries below illustrate that in some cases +# the two character 'Language' abbreviation is not identical to +# the two character 'Country' code for its country, +# E.g. 'Danmark/dk' versus 'Danish/da'. +# +# Note 3: In the case of 'ltz' we violate the RFC by using a three char +# specifier. There is 'work in progress' to fix this and get +# the reference data for rfc1766 cleaned up. +# +# Danish (da) - Dutch (nl) - English (en) - Estonian (et) +# French (fr) - German (de) - Greek-Modern (el) +# Italian (it) - Norwegian (no) - Norwegian Nynorsk (nn) - Korean (ko) +# Portugese (pt) - Luxembourgeois* (ltz) +# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz) +# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja) +# Russian (ru) - Croatian (hr) +# +AddLanguage da .dk +AddLanguage nl .nl +AddLanguage en .en +AddLanguage et .et +AddLanguage fr .fr +AddLanguage de .de +AddLanguage he .he +AddLanguage el .el +AddLanguage it .it +AddLanguage ja .ja +AddLanguage pl .po +AddLanguage ko .ko +AddLanguage pt .pt +AddLanguage nn .nn +AddLanguage no .no +AddLanguage pt-br .pt-br +AddLanguage ltz .ltz +AddLanguage ca .ca +AddLanguage es .es +AddLanguage sv .sv +AddLanguage cz .cz +AddLanguage ru .ru +AddLanguage tw .tw +AddLanguage zh-tw .tw +AddLanguage hr .hr + +# +# LanguagePriority allows you to give precedence to some languages +# in case of a tie during content negotiation. +# +# Just list the languages in decreasing order of preference. We have +# more or less alphabetized them here. You probably want to change this. +# +LanguagePriority en da nl et fr de el it ja ko no pl pt pt-br ltz ca es sv tw + +# +# ForceLanguagePriority allows you to serve a result page rather than +# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback) +# [in case no accepted languages matched the available variants] +# +ForceLanguagePriority Prefer Fallback + +# +# Specify a default charset for all pages sent out. This is +# always a good idea and opens the door for future internationalisation +# of your web site, should you ever want it. Specifying it as +# a default does little harm; as the standard dictates that a page +# is in iso-8859-1 (latin1) unless specified otherwise i.e. you +# are merely stating the obvious. There are also some security +# reasons in browsers, related to javascript and URL parsing +# which encourage you to always set a default char set. +# +AddDefaultCharset ISO-8859-1 + +# +# Commonly used filename extensions to character sets. You probably +# want to avoid clashes with the language extensions, unless you +# are good at carefully testing your setup after each change. +# See http://www.iana.org/assignments/character-sets for the +# official list of charset names and their respective RFCs. +# +AddCharset ISO-8859-1 .iso8859-1 .latin1 +AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen +AddCharset ISO-8859-3 .iso8859-3 .latin3 +AddCharset ISO-8859-4 .iso8859-4 .latin4 +AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru +AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb +AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk +AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb +AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk +AddCharset ISO-2022-JP .iso2022-jp .jis +AddCharset ISO-2022-KR .iso2022-kr .kis +AddCharset ISO-2022-CN .iso2022-cn .cis +AddCharset Big5 .Big5 .big5 +# For russian, more than one charset is used (depends on client, mostly): +AddCharset WINDOWS-1251 .cp-1251 .win-1251 +AddCharset CP866 .cp866 +AddCharset KOI8-r .koi8-r .koi8-ru +AddCharset KOI8-ru .koi8-uk .ua +AddCharset ISO-10646-UCS-2 .ucs2 +AddCharset ISO-10646-UCS-4 .ucs4 +AddCharset UTF-8 .utf8 + +# The set below does not map to a specific (iso) standard +# but works on a fairly wide range of browsers. Note that +# capitalization actually matters (it should not, but it +# does for some browsers). +# +# See http://www.iana.org/assignments/character-sets +# for a list of sorts. But browsers support few. +# +AddCharset GB2312 .gb2312 .gb +AddCharset utf-7 .utf7 +AddCharset utf-8 .utf8 +AddCharset big5 .big5 .b5 +AddCharset EUC-TW .euc-tw +AddCharset EUC-JP .euc-jp +AddCharset EUC-KR .euc-kr +AddCharset shift_jis .sjis + +# +# AddType allows you to add to or override the MIME configuration +# file mime.types for specific file types. +# +AddType application/x-tar .tgz +AddType image/x-icon .ico + +# +# AddHandler allows you to map certain file extensions to "handlers": +# actions unrelated to filetype. These can be either built into the server +# or added with the Action directive (see below) +# +# To use CGI scripts outside of ScriptAliased directories: +# (You will also need to add "ExecCGI" to the "Options" directive.) +# +#AddHandler cgi-script .cgi + +# +# For files that include their own HTTP headers: +# +#AddHandler send-as-is asis + +# +# For server-parsed imagemap files: +# +#AddHandler imap-file map + +# +# For type maps (negotiated resources): +# (This is enabled by default to allow the Apache "It Worked" page +# to be distributed in multiple languages.) +# +AddHandler type-map var + +# +# Filters allow you to process content before it is sent to the client. +# +# To parse .shtml files for server-side includes (SSI): +# (You will also need to add "Includes" to the "Options" directive.) +# +#AddType text/html .shtml +#AddOutputFilter INCLUDES .shtml + +# +# Action lets you define media types that will execute a script whenever +# a matching file is called. This eliminates the need for repeated URL +# pathnames for oft-used CGI file processors. +# Format: Action media/type /cgi-script/location +# Format: Action handler-name /cgi-script/location +# + +# +# Customizable error responses come in three flavors: +# 1) plain text 2) local redirects 3) external redirects +# +# Some examples: +#ErrorDocument 500 "The server made a boo boo." +#ErrorDocument 404 /missing.html +#ErrorDocument 404 "/cgi-bin/missing_handler.pl" +#ErrorDocument 402 http://www.example.com/subscription_info.html +# + +# +# Putting this all together, we can internationalize error responses. +# +# We use Alias to redirect any /error/HTTP_.html.var response to +# our collection of by-error message multi-language collections. We use +# includes to substitute the appropriate text. +# +# You can modify the messages' appearance without changing any of the +# default HTTP_.html.var files by adding the line: +# +# Alias /error/include/ "/your/include/path/" +# +# which allows you to create your own set of files by starting with the +# @FINKPREFIX@/var/apache2/error/include/ files and copying them to /your/include/path/, +# even on a per-VirtualHost basis. The default include files will display +# your Apache version number and your ServerAdmin email address regardless +# of the setting of ServerSignature. +# +# The internationalized error documents require mod_alias, mod_include +# and mod_negotiation. To activate them, uncomment the following 30 lines. + +# Alias /error/ "@FINKPREFIX@/var/apache2/error/" +# +# +# AllowOverride None +# Options IncludesNoExec +# AddOutputFilter Includes html +# AddHandler type-map var +# Order allow,deny +# Allow from all +# LanguagePriority en de es fr it nl sv +# ForceLanguagePriority Prefer Fallback +# +# +# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var +# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var +# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var +# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var +# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var +# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var +# ErrorDocument 410 /error/HTTP_GONE.html.var +# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var +# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var +# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var +# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var +# ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var +# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var +# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var +# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var +# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var +# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var + + +# +# The following directives modify normal HTTP response behavior to +# handle known problems with browser implementations. +# +BrowserMatch "Mozilla/2" nokeepalive +BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 +BrowserMatch "RealPlayer 4\.0" force-response-1.0 +BrowserMatch "Java/1\.0" force-response-1.0 +BrowserMatch "JDK/1\.0" force-response-1.0 + +# +# The following directive disables redirects on non-GET requests for +# a directory that does not include the trailing slash. This fixes a +# problem with Microsoft WebFolders which does not appropriately handle +# redirects for folders with DAV methods. +# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV. +# +BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully +BrowserMatch "^WebDrive" redirect-carefully +BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully +BrowserMatch "^gnome-vfs" redirect-carefully + +# +# Allow server status reports generated by mod_status, +# with the URL of http://servername/server-status +# Change the ".example.com" to match your domain to enable. +# +# +# SetHandler server-status +# Order deny,allow +# Deny from all +# Allow from .example.com +# + +# +# Allow remote server configuration reports, with the URL of +# http://servername/server-info (requires that mod_info.c be loaded). +# Change the ".example.com" to match your domain to enable. +# +# +# SetHandler server-info +# Order deny,allow +# Deny from all +# Allow from .example.com +# + +# +# Proxy Server directives. Uncomment the following lines to +# enable the proxy server: +# +# +#ProxyRequests On +# +# +# Order deny,allow +# Deny from all +# Allow from .example.com +# + +# +# Enable/disable the handling of HTTP/1.1 "Via:" headers. +# ("Full" adds the server version; "Block" removes all outgoing Via: headers) +# Set to one of: Off | On | Full | Block +# +#ProxyVia On + +# +# To enable the cache as well, edit and uncomment the following lines: +# (no cacheing without CacheRoot) +# +#CacheRoot "@FINKPREFIX@/var/apache2/proxy" +#CacheSize 5 +#CacheGcInterval 4 +#CacheMaxExpire 24 +#CacheLastModifiedFactor 0.1 +#CacheDefaultExpire 1 +#NoCache a-domain.com another-domain.edu joes.garage-sale.com + +# +# End of proxy directives. + +# +# Bring in additional module-specific configurations +# + + Include @FINKPREFIX@/etc/apache2/ssl.conf + + + +### Section 3: Virtual Hosts +# +# VirtualHost: If you want to maintain multiple domains/hostnames on your +# machine you can setup VirtualHost containers for them. Most configurations +# use only name-based virtual hosts so the server doesn't need to worry about +# IP addresses. This is indicated by the asterisks in the directives below. +# +# Please see the documentation at +# +# for further details before you try to setup virtual hosts. +# +# You may use the command line option '-S' to verify your virtual host +# configuration. + +# +# Use name-based virtual hosting. +# +#NameVirtualHost * + +# +# VirtualHost example: +# Almost any Apache directive may go into a VirtualHost container. +# The first VirtualHost section is used for requests without a known +# server name. +# +# +# ServerAdmin webmaster@dummy-host.example.com +# DocumentRoot /www/docs/dummy-host.example.com +# ServerName dummy-host.example.com +# ErrorLog logs/dummy-host.example.com-error_log +# CustomLog logs/dummy-host.example.com-access_log common +# +Include /private/etc/httpd/users diff -ruN httpd-2.0.48.orig/include/httpd.h httpd-2.0.48/include/httpd.h --- httpd-2.0.48.orig/include/httpd.h Fri Oct 24 10:19:31 2003 +++ httpd-2.0.48/include/httpd.h Fri Oct 31 10:33:25 2003 @@ -95,7 +95,7 @@ /* Maximum number of dynamically loaded modules */ #ifndef DYNAMIC_MODULE_LIMIT -#define DYNAMIC_MODULE_LIMIT 64 +#define DYNAMIC_MODULE_LIMIT 96 #endif /* Default administrator's address */ diff -ruN httpd-2.0.48.orig/modules/experimental/util_ldap.c httpd-2.0.48/modules/experimental/util_ldap.c --- httpd-2.0.48.orig/modules/experimental/util_ldap.c Fri May 9 06:58:16 2003 +++ httpd-2.0.48/modules/experimental/util_ldap.c Fri Oct 31 10:33:25 2003 @@ -34,6 +34,16 @@ #include "util_ldap.h" #include "util_ldap_cache.h" +#if APR_HAS_SHARED_MEMORY +extern apr_shm_t *util_ldap_shm; +extern apr_rmm_t *util_ldap_rmm; +#endif +extern util_ald_cache_t *util_ldap_cache; + +#if APR_HAS_THREADS +extern apr_thread_rwlock_t *util_ldap_cache_lock; +#endif + #if APR_HAVE_UNISTD_H #include #endif diff -ruN httpd-2.0.48.orig/modules/experimental/util_ldap_cache.c httpd-2.0.48/modules/experimental/util_ldap_cache.c --- httpd-2.0.48.orig/modules/experimental/util_ldap_cache.c Tue Jan 21 03:51:34 2003 +++ httpd-2.0.48/modules/experimental/util_ldap_cache.c Fri Oct 31 10:33:25 2003 @@ -25,6 +25,16 @@ #include "util_ldap.h" #include "util_ldap_cache.h" +#if APR_HAS_SHARED_MEMORY +apr_shm_t *util_ldap_shm; +apr_rmm_t *util_ldap_rmm; +#endif +util_ald_cache_t *util_ldap_cache; + +#if APR_HAS_THREADS +apr_thread_rwlock_t *util_ldap_cache_lock; +#endif + #ifdef APU_HAS_LDAP #define MODLDAP_SHMEM_CACHE "/tmp/mod_ldap_cache" diff -ruN httpd-2.0.48.orig/modules/experimental/util_ldap_cache_mgr.c httpd-2.0.48/modules/experimental/util_ldap_cache_mgr.c --- httpd-2.0.48.orig/modules/experimental/util_ldap_cache_mgr.c Tue Jan 21 03:51:34 2003 +++ httpd-2.0.48/modules/experimental/util_ldap_cache_mgr.c Fri Oct 31 10:33:25 2003 @@ -26,6 +26,16 @@ #include "util_ldap_cache.h" #include +#if APR_HAS_SHARED_MEMORY +extern apr_shm_t *util_ldap_shm; +extern apr_rmm_t *util_ldap_rmm; +#endif +extern util_ald_cache_t *util_ldap_cache; + +#if APR_HAS_THREADS +extern apr_thread_rwlock_t *util_ldap_cache_lock; +#endif + #ifdef APU_HAS_LDAP /* only here until strdup is gone */ diff -ruN httpd-2.0.48.orig/srclib/apr/build/ltmain.sh httpd-2.0.48/srclib/apr/build/ltmain.sh --- httpd-2.0.48.orig/srclib/apr/build/ltmain.sh Fri Oct 24 11:50:46 2003 +++ httpd-2.0.48/srclib/apr/build/ltmain.sh Fri Oct 31 10:33:25 2003 @@ -1758,7 +1758,7 @@ if test "$installed" = no; then notinst_deplibs="$notinst_deplibs $lib" - need_relink=yes + need_relink=no fi if test -n "$old_archive_from_expsyms_cmds"; then diff -ruN httpd-2.0.48.orig/srclib/apr/configure httpd-2.0.48/srclib/apr/configure --- httpd-2.0.48.orig/srclib/apr/configure Fri Oct 24 11:51:00 2003 +++ httpd-2.0.48/srclib/apr/configure Fri Oct 31 10:33:25 2003 @@ -30220,6 +30220,7 @@ case $host in *) broken_ipv6=0 + ;; esac echo "$as_me:$LINENO: checking for library containing getaddrinfo" >&5 diff -ruN httpd-2.0.48.orig/srclib/apr-util/xml/expat/conftools/ltmain.sh httpd-2.0.48/srclib/apr-util/xml/expat/conftools/ltmain.sh --- httpd-2.0.48.orig/srclib/apr-util/xml/expat/conftools/ltmain.sh Fri Oct 24 11:51:13 2003 +++ httpd-2.0.48/srclib/apr-util/xml/expat/conftools/ltmain.sh Fri Oct 31 10:33:26 2003 @@ -1758,7 +1758,7 @@ if test "$installed" = no; then notinst_deplibs="$notinst_deplibs $lib" - need_relink=yes + need_relink=no fi if test -n "$old_archive_from_expsyms_cmds"; then diff -ruN httpd-2.0.48.orig/srclib/pcre/ltmain.sh httpd-2.0.48/srclib/pcre/ltmain.sh --- httpd-2.0.48.orig/srclib/pcre/ltmain.sh Tue Mar 19 22:54:14 2002 +++ httpd-2.0.48/srclib/pcre/ltmain.sh Fri Oct 31 10:33:26 2003 @@ -1716,7 +1716,7 @@ if test "$installed" = no; then notinst_deplibs="$notinst_deplibs $lib" - need_relink=yes + need_relink=no fi if test -n "$old_archive_from_expsyms_cmds"; then diff -ruN httpd-2.0.48.orig/httpd-server.conf.fink httpd-2.0.48/httpd-server.conf.fink --- httpd-2.0.48.orig/httpd-server.conf.fink Wed Dec 31 17:00:00 1969 +++ httpd-2.0.48/httpd-server.conf.fink Fri Oct 31 10:33:25 2003 @@ -0,0 +1,1108 @@ +# +# Based upon the NCSA server configuration files originally by Rob McCool. +# +# This is the main Apache server configuration file. It contains the +# configuration directives that give the server its instructions. +# See for detailed information about +# the directives. +# +# Do NOT simply read the instructions in here without understanding +# what they do. They're here only as hints or reminders. If you are unsure +# consult the online docs. You have been warned. +# +# The configuration directives are grouped into three basic sections: +# 1. Directives that control the operation of the Apache server process as a +# whole (the 'global environment'). +# 2. Directives that define the parameters of the 'main' or 'default' server, +# which responds to requests that aren't handled by a virtual host. +# These directives also provide default values for the settings +# of all virtual hosts. +# 3. Settings for virtual hosts, which allow Web requests to be sent to +# different IP addresses or hostnames and have them handled by the +# same Apache server process. +# +# Configuration and logfile names: If the filenames you specify for many +# of the server's control files begin with "/" (or "drive:/" for Win32), the +# server will use that explicit path. If the filenames do *not* begin +# with "/", the value of ServerRoot is prepended -- so "logs/foo.log" +# with ServerRoot set to "@FINKPREFIX@/var/apache2" will be interpreted by the +# server as "@FINKPREFIX@/var/apache2/logs/foo.log". +# + +### Section 1: Global Environment +# +# The directives in this section affect the overall operation of Apache, +# such as the number of concurrent requests it can handle or where it +# can find its configuration files. +# + +# +# ServerRoot: The top of the directory tree under which the server's +# configuration, error, and log files are kept. +# +# NOTE! If you intend to place this on an NFS (or otherwise network) +# mounted filesystem then please read the LockFile documentation (available +# at ); +# you will save yourself a lot of trouble. +# +# Do NOT add a slash at the end of the directory path. +# +ServerRoot "@FINKPREFIX@/var/apache2" + +# +# The accept serialization lock file MUST BE STORED ON A LOCAL DISK. +# + + +#LockFile logs/accept.lock + + + +# +# ScoreBoardFile: File used to store internal server process information. +# If unspecified (the default), the scoreboard will be stored in an +# anonymous shared memory segment, and will be unavailable to third-party +# applications. +# If specified, ensure that no two invocations of Apache share the same +# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK. +# + + +#ScoreBoardFile logs/apache_runtime_status + + + + +# +# PidFile: The file in which the server should record its process +# identification number when it starts. +# + +PidFile logs/httpd.pid + + +# +# Timeout: The number of seconds before receives and sends time out. +# +Timeout 300 + +# +# KeepAlive: Whether or not to allow persistent connections (more than +# one request per connection). Set to "Off" to deactivate. +# +KeepAlive On + +# +# MaxKeepAliveRequests: The maximum number of requests to allow +# during a persistent connection. Set to 0 to allow an unlimited amount. +# We recommend you leave this number high, for maximum performance. +# +MaxKeepAliveRequests 100 + +# +# KeepAliveTimeout: Number of seconds to wait for the next request from the +# same client on the same connection. +# +KeepAliveTimeout 15 + +## +## Server-Pool Size Regulation (MPM specific) +## + +# prefork MPM +# StartServers: number of server processes to start +# MinSpareServers: minimum number of server processes which are kept spare +# MaxSpareServers: maximum number of server processes which are kept spare +# MaxClients: maximum number of server processes allowed to start +# MaxRequestsPerChild: maximum number of requests a server process serves + +StartServers 5 +MinSpareServers 5 +MaxSpareServers 10 +MaxClients 150 +MaxRequestsPerChild 0 + + +# worker MPM +# StartServers: initial number of server processes to start +# MaxClients: maximum number of simultaneous client connections +# MinSpareThreads: minimum number of worker threads which are kept spare +# MaxSpareThreads: maximum number of worker threads which are kept spare +# ThreadsPerChild: constant number of worker threads in each server process +# MaxRequestsPerChild: maximum number of requests a server process serves + +StartServers 2 +MaxClients 150 +MinSpareThreads 25 +MaxSpareThreads 75 +ThreadsPerChild 25 +MaxRequestsPerChild 0 + + +# perchild MPM +# NumServers: constant number of server processes +# StartThreads: initial number of worker threads in each server process +# MinSpareThreads: minimum number of worker threads which are kept spare +# MaxSpareThreads: maximum number of worker threads which are kept spare +# MaxThreadsPerChild: maximum number of worker threads in each server process +# MaxRequestsPerChild: maximum number of connections per server process + +NumServers 5 +StartThreads 5 +MinSpareThreads 5 +MaxSpareThreads 10 +MaxThreadsPerChild 20 +MaxRequestsPerChild 0 + + +# WinNT MPM +# ThreadsPerChild: constant number of worker threads in the server process +# MaxRequestsPerChild: maximum number of requests a server process serves + +ThreadsPerChild 250 +MaxRequestsPerChild 0 + + +# BeOS MPM +# StartThreads: how many threads do we initially spawn? +# MaxClients: max number of threads we can have (1 thread == 1 client) +# MaxRequestsPerThread: maximum number of requests each thread will process + +StartThreads 10 +MaxClients 50 +MaxRequestsPerThread 10000 + + +# NetWare MPM +# ThreadStackSize: Stack size allocated for each worker thread +# StartThreads: Number of worker threads launched at server startup +# MinSpareThreads: Minimum number of idle threads, to handle request spikes +# MaxSpareThreads: Maximum number of idle threads +# MaxThreads: Maximum number of worker threads alive at the same time +# MaxRequestsPerChild: Maximum number of requests a thread serves. It is +# recommended that the default value of 0 be set for this +# directive on NetWare. This will allow the thread to +# continue to service requests indefinitely. + +ThreadStackSize 65536 +StartThreads 250 +MinSpareThreads 25 +MaxSpareThreads 250 +MaxThreads 1000 +MaxRequestsPerChild 0 + + +# OS/2 MPM +# StartServers: Number of server processes to maintain +# MinSpareThreads: Minimum number of idle threads per process, +# to handle request spikes +# MaxSpareThreads: Maximum number of idle threads per process +# MaxRequestsPerChild: Maximum number of connections per server process + +StartServers 2 +MinSpareThreads 5 +MaxSpareThreads 10 +MaxRequestsPerChild 0 + + +# +# Listen: Allows you to bind Apache to specific IP addresses and/or +# ports, instead of the default. See also the +# directive. +# +# Change this to Listen on specific IP addresses as shown below to +# prevent Apache from glomming onto all bound IP addresses (0.0.0.0) +# +#Listen 12.34.56.78:80 + +Listen 80 + +# +# Dynamic Shared Object (DSO) Support +# +# To be able to use the functionality of a module which was built as a DSO you +# have to place corresponding `LoadModule' lines at this location so the +# directives contained in it are actually available _before_ they are used. +# Statically compiled modules (those listed by `httpd -l') do not need +# to be loaded here. +# +# Example: +# LoadModule foo_module modules/mod_foo.so +# +LoadModule access_module @FINKPREFIX@/lib/apache2/modules/mod_access.so +LoadModule auth_module @FINKPREFIX@/lib/apache2/modules/mod_auth.so +LoadModule file_cache_module @FINKPREFIX@/lib/apache2/modules/mod_file_cache.so +LoadModule echo_module @FINKPREFIX@/lib/apache2/modules/mod_echo.so +LoadModule charset_lite_module @FINKPREFIX@/lib/apache2/modules/mod_charset_lite.so +LoadModule cache_module @FINKPREFIX@/lib/apache2/modules/mod_cache.so +LoadModule disk_cache_module @FINKPREFIX@/lib/apache2/modules/mod_disk_cache.so +LoadModule mem_cache_module @FINKPREFIX@/lib/apache2/modules/mod_mem_cache.so +LoadModule example_module @FINKPREFIX@/lib/apache2/modules/mod_example.so +LoadModule case_filter_module @FINKPREFIX@/lib/apache2/modules/mod_case_filter.so +LoadModule case_filter_in_module @FINKPREFIX@/lib/apache2/modules/mod_case_filter_in.so +LoadModule ext_filter_module @FINKPREFIX@/lib/apache2/modules/mod_ext_filter.so +LoadModule include_module @FINKPREFIX@/lib/apache2/modules/mod_include.so +LoadModule deflate_module @FINKPREFIX@/lib/apache2/modules/mod_deflate.so +LoadModule log_config_module @FINKPREFIX@/lib/apache2/modules/mod_log_config.so +LoadModule logio_module @FINKPREFIX@/lib/apache2/modules/mod_logio.so +LoadModule env_module @FINKPREFIX@/lib/apache2/modules/mod_env.so +LoadModule cern_meta_module @FINKPREFIX@/lib/apache2/modules/mod_cern_meta.so +LoadModule setenvif_module @FINKPREFIX@/lib/apache2/modules/mod_setenvif.so +LoadModule optional_hook_export_module @FINKPREFIX@/lib/apache2/modules/mod_optional_hook_export.so +LoadModule optional_hook_import_module @FINKPREFIX@/lib/apache2/modules/mod_optional_hook_import.so +LoadModule optional_fn_import_module @FINKPREFIX@/lib/apache2/modules/mod_optional_fn_import.so +LoadModule optional_fn_export_module @FINKPREFIX@/lib/apache2/modules/mod_optional_fn_export.so +LoadModule mime_module @FINKPREFIX@/lib/apache2/modules/mod_mime.so +LoadModule dav_module @FINKPREFIX@/lib/apache2/modules/mod_dav.so +LoadModule status_module @FINKPREFIX@/lib/apache2/modules/mod_status.so +LoadModule autoindex_module @FINKPREFIX@/lib/apache2/modules/mod_autoindex.so +LoadModule asis_module @FINKPREFIX@/lib/apache2/modules/mod_asis.so +LoadModule cgi_module @FINKPREFIX@/lib/apache2/modules/mod_cgi.so +LoadModule dav_fs_module @FINKPREFIX@/lib/apache2/modules/mod_dav_fs.so +LoadModule negotiation_module @FINKPREFIX@/lib/apache2/modules/mod_negotiation.so +LoadModule dir_module @FINKPREFIX@/lib/apache2/modules/mod_dir.so +LoadModule imap_module @FINKPREFIX@/lib/apache2/modules/mod_imap.so +LoadModule userdir_module @FINKPREFIX@/lib/apache2/modules/mod_userdir.so +LoadModule alias_module @FINKPREFIX@/lib/apache2/modules/mod_alias.so + +# +# ExtendedStatus controls whether Apache will generate "full" status +# information (ExtendedStatus On) or just basic information (ExtendedStatus +# Off) when the "server-status" handler is called. The default is Off. +# +#ExtendedStatus On + +### Section 2: 'Main' server configuration +# +# The directives in this section set up the values used by the 'main' +# server, which responds to any requests that aren't handled by a +# definition. These values also provide defaults for +# any containers you may define later in the file. +# +# All of these directives may appear inside containers, +# in which case these default settings will be overridden for the +# virtual host being defined. +# + + + +# +# If you wish httpd to run as a different user or group, you must run +# httpd as root initially and it will switch. +# +# User/Group: The name (or #number) of the user/group to run httpd as. +# . On SCO (ODT 3) use "User nouser" and "Group nogroup". +# . On HPUX you may not be able to use shared memory as nobody, and the +# suggested workaround is to create a user www and use that user. +# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET) +# when the value of (unsigned)Group is above 60000; +# don't use Group #-1 on these systems! +# +User www +Group www + + + +# +# ServerAdmin: Your address, where problems with the server should be +# e-mailed. This address appears on some server-generated pages, such +# as error documents. e.g. admin@your-domain.com +# +ServerAdmin you@your.address + +# +# ServerName gives the name and port that the server uses to identify itself. +# This can often be determined automatically, but we recommend you specify +# it explicitly to prevent problems during startup. +# +# If this is not set to valid DNS name for your host, server-generated +# redirections will not work. See also the UseCanonicalName directive. +# +# If your host doesn't have a registered DNS name, enter its IP address here. +# You will have to access it by its address anyway, and this will make +# redirections work in a sensible way. +# +#ServerName new.host.name:80 + +# +# UseCanonicalName: Determines how Apache constructs self-referencing +# URLs and the SERVER_NAME and SERVER_PORT variables. +# When set "Off", Apache will use the Hostname and Port supplied +# by the client. When set "On", Apache will use the value of the +# ServerName directive. +# +UseCanonicalName Off + +# +# DocumentRoot: The directory out of which you will serve your +# documents. By default, all requests are taken from this directory, but +# symbolic links and aliases may be used to point to other locations. +# +DocumentRoot "/Library/WebServer/Documents" + +# +# Each directory to which Apache has access can be configured with respect +# to which services and features are allowed and/or disabled in that +# directory (and its subdirectories). +# +# First, we configure the "default" to be a very restrictive set of +# features. +# + + Options FollowSymLinks + AllowOverride None + + +# +# Note that from this point forward you must specifically allow +# particular features to be enabled - so if something's not working as +# you might expect, make sure that you have specifically enabled it +# below. +# + +# +# This should be changed to whatever you set DocumentRoot to. +# + + +# +# Possible values for the Options directive are "None", "All", +# or any combination of: +# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews +# +# Note that "MultiViews" must be named *explicitly* --- "Options All" +# doesn't give it to you. +# +# The Options directive is both complicated and important. Please see +# http://httpd.apache.org/docs-2.0/mod/core.html#options +# for more information. +# + Options Indexes FollowSymLinks MultiViews + +# +# AllowOverride controls what directives may be placed in .htaccess files. +# It can be "All", "None", or any combination of the keywords: +# Options FileInfo AuthConfig Limit +# + AllowOverride None + +# +# Controls who can get stuff from this server. +# + Order allow,deny + Allow from all + + + +# +# UserDir: The name of the directory that is appended onto a user's home +# directory if a ~user request is received. +# + + UserDir Sites + + +# +# Control access to UserDir directories. The following is an example +# for a site where these directories are restricted to read-only. +# + + AllowOverride FileInfo AuthConfig Limit Indexes + Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec + + Order allow,deny + Allow from all + + + Order deny,allow + Deny from all + + + +# +# DirectoryIndex: sets the file that Apache will serve if a directory +# is requested. +# +# The index.html.var file (a type-map) is used to deliver content- +# negotiated documents. The MultiViews Option can be used for the +# same purpose, but it is much slower. +# +DirectoryIndex index.html + +# +# AccessFileName: The name of the file to look for in each directory +# for additional configuration directives. See also the AllowOverride +# directive. +# +AccessFileName .htaccess + +# +# The following lines prevent .htaccess and .htpasswd files from being +# viewed by Web clients. +# + + Order allow,deny + Deny from all + + +# +# TypesConfig describes where the mime.types file (or equivalent) is +# to be found. +# +TypesConfig @FINKPREFIX@/etc/apache2/mime.types + +# +# DefaultType is the default MIME type the server will use for a document +# if it cannot otherwise determine one, such as from filename extensions. +# If your server contains mostly text or HTML documents, "text/plain" is +# a good value. If most of your content is binary, such as applications +# or images, you may want to use "application/octet-stream" instead to +# keep browsers from trying to display binary files as though they are +# text. +# +DefaultType text/plain + +# +# The mod_mime_magic module allows the server to use various hints from the +# contents of the file itself to determine its type. The MIMEMagicFile +# directive tells the module where the hint definitions are located. +# + + MIMEMagicFile @FINKPREFIX@/etc/apache2/magic + + +# +# HostnameLookups: Log the names of clients or just their IP addresses +# e.g., www.apache.org (on) or 204.62.129.132 (off). +# The default is off because it'd be overall better for the net if people +# had to knowingly turn this feature on, since enabling it means that +# each client request will result in AT LEAST one lookup request to the +# nameserver. +# +HostnameLookups Off + +# +# EnableMMAP: Control whether memory-mapping is used to deliver +# files (assuming that the underlying OS supports it). +# The default is on; turn this off if you serve from NFS-mounted +# filesystems. On some systems, turning it off (regardless of +# filesystem) can improve performance; for details, please see +# http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap +# +#EnableMMAP off + +# +# EnableSendfile: Control whether the sendfile kernel support is +# used to deliver files (assuming that the OS supports it). +# The default is on; turn this off if you serve from NFS-mounted +# filesystems. Please see +# http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile +# +#EnableSendfile off + +# +# ErrorLog: The location of the error log file. +# If you do not specify an ErrorLog directive within a +# container, error messages relating to that virtual host will be +# logged here. If you *do* define an error logfile for a +# container, that host's errors will be logged there and not here. +# +ErrorLog logs/error_log + +# +# LogLevel: Control the number of messages logged to the error_log. +# Possible values include: debug, info, notice, warn, error, crit, +# alert, emerg. +# +LogLevel warn + +# +# The following directives define some format nicknames for use with +# a CustomLog directive (see below). +# +LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined +LogFormat "%h %l %u %t \"%r\" %>s %b" common +LogFormat "%{Referer}i -> %U" referer +LogFormat "%{User-agent}i" agent + +# You need to enable mod_logio.c to use %I and %O +#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio + +# +# The location and format of the access logfile (Common Logfile Format). +# If you do not define any access logfiles within a +# container, they will be logged here. Contrariwise, if you *do* +# define per- access logfiles, transactions will be +# logged therein and *not* in this file. +# +CustomLog logs/access_log common + +# +# If you would like to have agent and referer logfiles, uncomment the +# following directives. +# +#CustomLog logs/referer_log referer +#CustomLog logs/agent_log agent + +# +# If you prefer a single logfile with access, agent, and referer information +# (Combined Logfile Format) you can use the following directive. +# +#CustomLog logs/access_log combined + +# +# ServerTokens +# This directive configures what you return as the Server HTTP response +# Header. The default is 'Full' which sends information about the OS-Type +# and compiled in modules. +# Set to one of: Full | OS | Minor | Minimal | Major | Prod +# where Full conveys the most information, and Prod the least. +# +ServerTokens Full + +# +# Optionally add a line containing the server version and virtual host +# name to server-generated pages (internal error documents, FTP directory +# listings, mod_status and mod_info output etc., but not CGI generated +# documents or custom error documents). +# Set to "EMail" to also include a mailto: link to the ServerAdmin. +# Set to one of: On | Off | EMail +# +ServerSignature On + +# +# Aliases: Add here as many aliases as you need (with no limit). The format is +# Alias fakename realname +# +# Note that if you include a trailing / on fakename then the server will +# require it to be present in the URL. So "/icons" isn't aliased in this +# example, only "/icons/". If the fakename is slash-terminated, then the +# realname must also be slash terminated, and if the fakename omits the +# trailing slash, the realname must also omit it. +# +# We include the /icons/ alias for FancyIndexed directory listings. If you +# do not use FancyIndexing, you may comment this out. +# +Alias /icons/ "@FINKPREFIX@/var/apache2/icons/" + + + Options Indexes MultiViews + AllowOverride None + Order allow,deny + Allow from all + + +# +# This should be changed to the ServerRoot/manual/. The alias provides +# the manual, even if you choose to move your DocumentRoot. You may comment +# this out if you do not care for the documentation. +# +Alias /manual "@FINKPREFIX@/var/apache2/manual" + + + Options Indexes FollowSymLinks MultiViews IncludesNoExec + AddOutputFilter Includes html + AllowOverride None + Order allow,deny + Allow from all + + +# +# ScriptAlias: This controls which directories contain server scripts. +# ScriptAliases are essentially the same as Aliases, except that +# documents in the realname directory are treated as applications and +# run by the server when requested rather than as documents sent to the client. +# The same rules about trailing "/" apply to ScriptAlias directives as to +# Alias. +# +ScriptAlias /cgi-bin/ "/Library/WebServer/CGI-Executables/" + +# Needed to search through fink's perlmodules + + SetEnv PERL5LIB @FINKPREFIX@/lib/perl5 + + + +# +# Additional to mod_cgid.c settings, mod_cgid has Scriptsock +# for setting UNIX socket for communicating with cgid. +# +#Scriptsock logs/cgisock + + +# +# "@FINKPREFIX@/var/apache2/cgi-bin" should be changed to whatever your ScriptAliased +# CGI directory exists, if you have that configured. +# + + AllowOverride None + Options None + Order allow,deny + Allow from all + + +# +# Redirect allows you to tell clients about documents which used to exist in +# your server's namespace, but do not anymore. This allows you to tell the +# clients where to look for the relocated document. +# Example: +# Redirect permanent /foo http://www.example.com/bar + +# +# Directives controlling the display of server-generated directory listings. +# + +# +# IndexOptions: Controls the appearance of server-generated directory +# listings. +# +IndexOptions FancyIndexing VersionSort + +# +# AddIcon* directives tell the server which icon to show for different +# files or filename extensions. These are only displayed for +# FancyIndexed directories. +# +AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip + +AddIconByType (TXT,/icons/text.gif) text/* +AddIconByType (IMG,/icons/image2.gif) image/* +AddIconByType (SND,/icons/sound2.gif) audio/* +AddIconByType (VID,/icons/movie.gif) video/* + +AddIcon /icons/binary.gif .bin .exe +AddIcon /icons/binhex.gif .hqx +AddIcon /icons/tar.gif .tar +AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv +AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip +AddIcon /icons/a.gif .ps .ai .eps +AddIcon /icons/layout.gif .html .shtml .htm .pdf +AddIcon /icons/text.gif .txt +AddIcon /icons/c.gif .c +AddIcon /icons/p.gif .pl .py +AddIcon /icons/f.gif .for +AddIcon /icons/dvi.gif .dvi +AddIcon /icons/uuencoded.gif .uu +AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl +AddIcon /icons/tex.gif .tex +AddIcon /icons/bomb.gif core + +AddIcon /icons/back.gif .. +AddIcon /icons/hand.right.gif README +AddIcon /icons/folder.gif ^^DIRECTORY^^ +AddIcon /icons/blank.gif ^^BLANKICON^^ + +# +# DefaultIcon is which icon to show for files which do not have an icon +# explicitly set. +# +DefaultIcon /icons/unknown.gif + +# +# AddDescription allows you to place a short description after a file in +# server-generated indexes. These are only displayed for FancyIndexed +# directories. +# Format: AddDescription "description" filename +# +#AddDescription "GZIP compressed document" .gz +#AddDescription "tar archive" .tar +#AddDescription "GZIP compressed tar archive" .tgz + +# +# ReadmeName is the name of the README file the server will look for by +# default, and append to directory listings. +# +# HeaderName is the name of a file which should be prepended to +# directory indexes. +ReadmeName README.html +HeaderName HEADER.html + +# +# IndexIgnore is a set of filenames which directory indexing should ignore +# and not include in the listing. Shell-style wildcarding is permitted. +# +IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t + +# +# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress +# information on the fly. Note: Not all browsers support this. +# Despite the name similarity, the following Add* directives have nothing +# to do with the FancyIndexing customization directives above. +# +AddEncoding x-compress Z +AddEncoding x-gzip gz tgz + +# +# DefaultLanguage and AddLanguage allows you to specify the language of +# a document. You can then use content negotiation to give a browser a +# file in a language the user can understand. +# +# Specify a default language. This means that all data +# going out without a specific language tag (see below) will +# be marked with this one. You probably do NOT want to set +# this unless you are sure it is correct for all cases. +# +# * It is generally better to not mark a page as +# * being a certain language than marking it with the wrong +# * language! +# +# DefaultLanguage nl +# +# Note 1: The suffix does not have to be the same as the language +# keyword --- those with documents in Polish (whose net-standard +# language code is pl) may wish to use "AddLanguage pl .po" to +# avoid the ambiguity with the common suffix for perl scripts. +# +# Note 2: The example entries below illustrate that in some cases +# the two character 'Language' abbreviation is not identical to +# the two character 'Country' code for its country, +# E.g. 'Danmark/dk' versus 'Danish/da'. +# +# Note 3: In the case of 'ltz' we violate the RFC by using a three char +# specifier. There is 'work in progress' to fix this and get +# the reference data for rfc1766 cleaned up. +# +# Danish (da) - Dutch (nl) - English (en) - Estonian (et) +# French (fr) - German (de) - Greek-Modern (el) +# Italian (it) - Norwegian (no) - Norwegian Nynorsk (nn) - Korean (ko) +# Portugese (pt) - Luxembourgeois* (ltz) +# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz) +# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja) +# Russian (ru) - Croatian (hr) +# +AddLanguage da .dk +AddLanguage nl .nl +AddLanguage en .en +AddLanguage et .et +AddLanguage fr .fr +AddLanguage de .de +AddLanguage he .he +AddLanguage el .el +AddLanguage it .it +AddLanguage ja .ja +AddLanguage pl .po +AddLanguage ko .ko +AddLanguage pt .pt +AddLanguage nn .nn +AddLanguage no .no +AddLanguage pt-br .pt-br +AddLanguage ltz .ltz +AddLanguage ca .ca +AddLanguage es .es +AddLanguage sv .sv +AddLanguage cz .cz +AddLanguage ru .ru +AddLanguage tw .tw +AddLanguage zh-tw .tw +AddLanguage hr .hr + +# +# LanguagePriority allows you to give precedence to some languages +# in case of a tie during content negotiation. +# +# Just list the languages in decreasing order of preference. We have +# more or less alphabetized them here. You probably want to change this. +# +LanguagePriority en da nl et fr de el it ja ko no pl pt pt-br ltz ca es sv tw + +# +# ForceLanguagePriority allows you to serve a result page rather than +# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback) +# [in case no accepted languages matched the available variants] +# +ForceLanguagePriority Prefer Fallback + +# +# Specify a default charset for all pages sent out. This is +# always a good idea and opens the door for future internationalisation +# of your web site, should you ever want it. Specifying it as +# a default does little harm; as the standard dictates that a page +# is in iso-8859-1 (latin1) unless specified otherwise i.e. you +# are merely stating the obvious. There are also some security +# reasons in browsers, related to javascript and URL parsing +# which encourage you to always set a default char set. +# +AddDefaultCharset ISO-8859-1 + +# +# Commonly used filename extensions to character sets. You probably +# want to avoid clashes with the language extensions, unless you +# are good at carefully testing your setup after each change. +# See http://www.iana.org/assignments/character-sets for the +# official list of charset names and their respective RFCs. +# +AddCharset ISO-8859-1 .iso8859-1 .latin1 +AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen +AddCharset ISO-8859-3 .iso8859-3 .latin3 +AddCharset ISO-8859-4 .iso8859-4 .latin4 +AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru +AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb +AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk +AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb +AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk +AddCharset ISO-2022-JP .iso2022-jp .jis +AddCharset ISO-2022-KR .iso2022-kr .kis +AddCharset ISO-2022-CN .iso2022-cn .cis +AddCharset Big5 .Big5 .big5 +# For russian, more than one charset is used (depends on client, mostly): +AddCharset WINDOWS-1251 .cp-1251 .win-1251 +AddCharset CP866 .cp866 +AddCharset KOI8-r .koi8-r .koi8-ru +AddCharset KOI8-ru .koi8-uk .ua +AddCharset ISO-10646-UCS-2 .ucs2 +AddCharset ISO-10646-UCS-4 .ucs4 +AddCharset UTF-8 .utf8 + +# The set below does not map to a specific (iso) standard +# but works on a fairly wide range of browsers. Note that +# capitalization actually matters (it should not, but it +# does for some browsers). +# +# See http://www.iana.org/assignments/character-sets +# for a list of sorts. But browsers support few. +# +AddCharset GB2312 .gb2312 .gb +AddCharset utf-7 .utf7 +AddCharset utf-8 .utf8 +AddCharset big5 .big5 .b5 +AddCharset EUC-TW .euc-tw +AddCharset EUC-JP .euc-jp +AddCharset EUC-KR .euc-kr +AddCharset shift_jis .sjis + +# +# AddType allows you to add to or override the MIME configuration +# file mime.types for specific file types. +# +AddType application/x-tar .tgz +AddType image/x-icon .ico + +# +# AddHandler allows you to map certain file extensions to "handlers": +# actions unrelated to filetype. These can be either built into the server +# or added with the Action directive (see below) +# +# To use CGI scripts outside of ScriptAliased directories: +# (You will also need to add "ExecCGI" to the "Options" directive.) +# +#AddHandler cgi-script .cgi + +# +# For files that include their own HTTP headers: +# +#AddHandler send-as-is asis + +# +# For server-parsed imagemap files: +# +#AddHandler imap-file map + +# +# For type maps (negotiated resources): +# (This is enabled by default to allow the Apache "It Worked" page +# to be distributed in multiple languages.) +# +AddHandler type-map var + +# +# Filters allow you to process content before it is sent to the client. +# +# To parse .shtml files for server-side includes (SSI): +# (You will also need to add "Includes" to the "Options" directive.) +# +#AddType text/html .shtml +#AddOutputFilter INCLUDES .shtml + +# +# Action lets you define media types that will execute a script whenever +# a matching file is called. This eliminates the need for repeated URL +# pathnames for oft-used CGI file processors. +# Format: Action media/type /cgi-script/location +# Format: Action handler-name /cgi-script/location +# + +# +# Customizable error responses come in three flavors: +# 1) plain text 2) local redirects 3) external redirects +# +# Some examples: +#ErrorDocument 500 "The server made a boo boo." +#ErrorDocument 404 /missing.html +#ErrorDocument 404 "/cgi-bin/missing_handler.pl" +#ErrorDocument 402 http://www.example.com/subscription_info.html +# + +# +# Putting this all together, we can internationalize error responses. +# +# We use Alias to redirect any /error/HTTP_.html.var response to +# our collection of by-error message multi-language collections. We use +# includes to substitute the appropriate text. +# +# You can modify the messages' appearance without changing any of the +# default HTTP_.html.var files by adding the line: +# +# Alias /error/include/ "/your/include/path/" +# +# which allows you to create your own set of files by starting with the +# @FINKPREFIX@/var/apache2/error/include/ files and copying them to /your/include/path/, +# even on a per-VirtualHost basis. The default include files will display +# your Apache version number and your ServerAdmin email address regardless +# of the setting of ServerSignature. +# +# The internationalized error documents require mod_alias, mod_include +# and mod_negotiation. To activate them, uncomment the following 30 lines. + +# Alias /error/ "@FINKPREFIX@/var/apache2/error/" +# +# +# AllowOverride None +# Options IncludesNoExec +# AddOutputFilter Includes html +# AddHandler type-map var +# Order allow,deny +# Allow from all +# LanguagePriority en de es fr it nl sv +# ForceLanguagePriority Prefer Fallback +# +# +# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var +# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var +# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var +# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var +# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var +# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var +# ErrorDocument 410 /error/HTTP_GONE.html.var +# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var +# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var +# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var +# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var +# ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var +# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var +# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var +# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var +# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var +# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var + + +# +# The following directives modify normal HTTP response behavior to +# handle known problems with browser implementations. +# +BrowserMatch "Mozilla/2" nokeepalive +BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 +BrowserMatch "RealPlayer 4\.0" force-response-1.0 +BrowserMatch "Java/1\.0" force-response-1.0 +BrowserMatch "JDK/1\.0" force-response-1.0 + +# +# The following directive disables redirects on non-GET requests for +# a directory that does not include the trailing slash. This fixes a +# problem with Microsoft WebFolders which does not appropriately handle +# redirects for folders with DAV methods. +# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV. +# +BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully +BrowserMatch "^WebDrive" redirect-carefully +BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully +BrowserMatch "^gnome-vfs" redirect-carefully + +# +# Allow server status reports generated by mod_status, +# with the URL of http://servername/server-status +# Change the ".example.com" to match your domain to enable. +# +# +# SetHandler server-status +# Order deny,allow +# Deny from all +# Allow from .example.com +# + +# +# Allow remote server configuration reports, with the URL of +# http://servername/server-info (requires that mod_info.c be loaded). +# Change the ".example.com" to match your domain to enable. +# +# +# SetHandler server-info +# Order deny,allow +# Deny from all +# Allow from .example.com +# + +# +# Proxy Server directives. Uncomment the following lines to +# enable the proxy server: +# +# +#ProxyRequests On +# +# +# Order deny,allow +# Deny from all +# Allow from .example.com +# + +# +# Enable/disable the handling of HTTP/1.1 "Via:" headers. +# ("Full" adds the server version; "Block" removes all outgoing Via: headers) +# Set to one of: Off | On | Full | Block +# +#ProxyVia On + +# +# To enable the cache as well, edit and uncomment the following lines: +# (no cacheing without CacheRoot) +# +#CacheRoot "@FINKPREFIX@/var/apache2/proxy" +#CacheSize 5 +#CacheGcInterval 4 +#CacheMaxExpire 24 +#CacheLastModifiedFactor 0.1 +#CacheDefaultExpire 1 +#NoCache a-domain.com another-domain.edu joes.garage-sale.com + +# +# End of proxy directives. + +# +# Bring in additional module-specific configurations +# + + Include @FINKPREFIX@/etc/apache2/ssl.conf + + + +### Section 3: Virtual Hosts +# +# VirtualHost: If you want to maintain multiple domains/hostnames on your +# machine you can setup VirtualHost containers for them. Most configurations +# use only name-based virtual hosts so the server doesn't need to worry about +# IP addresses. This is indicated by the asterisks in the directives below. +# +# Please see the documentation at +# +# for further details before you try to setup virtual hosts. +# +# You may use the command line option '-S' to verify your virtual host +# configuration. + +# +# Use name-based virtual hosting. +# +#NameVirtualHost * + +# +# VirtualHost example: +# Almost any Apache directive may go into a VirtualHost container. +# The first VirtualHost section is used for requests without a known +# server name. +# +# +# ServerAdmin webmaster@dummy-host.example.com +# DocumentRoot /www/docs/dummy-host.example.com +# ServerName dummy-host.example.com +# ErrorLog logs/dummy-host.example.com-error_log +# CustomLog logs/dummy-host.example.com-access_log common +#